We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR4 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 1.5TB (12x128GB) DDR4 3200 PC4-25600 CL22 1.2V 4Rx4 ECC RDIMM Kit

SKU CH-PYT1-5P4N7

12-module kit provides 1.5 TB of DDR4 3200 ECC registered server memory at CL22 and 1.2 V

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Capacity 1.5TB (12 x 128GB)

  • 5TB total capacity across 12 modules of 128GB each
  • DDR4 3200 speed rated at PC4-25600 for high bandwidth
  • CL22 latency at 1.20V for efficient operation
  • ECC registered 4Rx4 design ensures data integrity
  • 288-pin RDIMM form factor built with major OEM chips

High-density DDR4 ECC kit

This NEMIX RAM kit delivers 1.5TB of registered DDR4 memory across twelve 128GB modules. It runs at 3200 MT/s with CL22 latency at 1.2V. ECC and 4Rx4 organisation protect data integrity in multi-socket servers and workstations.

Suited for memory-bound server workloads

Virtualisation hosts, in-memory databases and large-scale compute nodes benefit from the high capacity and registered design. Systems limited to fewer than twelve DIMM slots, consumer motherboards without ECC support or platforms capped below 3200 MT/s cannot use this kit fully.

Twelve matched modules simplify deployment

The pre-validated 12x128GB configuration removes the need to source and qualify individual sticks. Major OEM DRAM from Samsung, Micron or Hynix ensures consistent quality across the kit. No heat spreaders are included, so airflow planning remains the integrator's responsibility.

Highlights

  • 5TB total capacity across 12 modules of 128GB each
  • DDR4 3200 speed rated at PC4-25600 for high bandwidth
  • CL22 latency at 1.20V for efficient operation
  • ECC registered 4Rx4 design ensures data integrity
  • 288-pin RDIMM form factor built with major OEM chips

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-744K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 ECC RDIMM Registered Server Memory Motherboard Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does this 12 x 128 GB DDR4 RDIMM kit require a motherboard with 12 DIMM slots?

Yes, the kit contains 12 registered DIMMs, so the host board must provide 12 DDR4 RDIMM slots and support 1.5 TB total capacity.

Can I mix these 4Rx4 modules with older 2Rx4 DDR4 RDIMMs?

Mixing different rank configurations is not recommended; the memory controller will typically clock all channels to the slowest common settings and may limit total capacity.

How can I verify the kit runs at DDR4 3200 CL22 after installation?

Check the BIOS memory information or use a tool such as CPU-Z to confirm each module reports 3200 MT/s, CL22 timing and 1.20 V operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.