We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1.5TB (12x128GB) DDR5 5600 ECC RDIMM Kit

SKU CH-5BTV-TGFCV

A 1.5TB DDR5 ECC RDIMM kit of twelve 128GB modules running at 5600MHz with CL46 latency and 1.1V operation

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Capacity 1.5TB (12 x 128GB)

  • 5 TB total capacity from twelve 128 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • ECC registered design protects data integrity in servers
  • 10 V operation reduces power draw per module
  • 4Rx4 organisation maximises density per DIMM slot

High-Capacity DDR5 Server Kit

This 1.5TB kit assembles twelve 128GB DDR5 5600 ECC RDIMM modules for servers and workstations that need maximum registered memory capacity. The CL46 latency and 1.10V operation suit enterprise workloads where data integrity and density matter more than low latency.

Thermals Power and Noise

Modules run at the standard 1.1V DDR5 voltage without heat spreaders, relying on chassis airflow for cooling in normal server use. Registered buffering and ECC add minimal electrical load while keeping signal integrity high across all twelve slots.

Build Integration

The 288-pin RDIMM form factor fits DDR5 server motherboards that support 4Rx4 registered DIMMs and 1.5TB total capacity. No heat spreaders leave adjacent slots accessible, but the board must provide twelve DDR5 RDIMM sockets and matching memory-controller support.

Highlights

  • 5 TB total capacity from twelve 128 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • ECC registered design protects data integrity in servers
  • 10 V operation reduces power draw per module
  • 4Rx4 organisation maximises density per DIMM slot

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-744K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Memory Motherboard Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 12 288-pin DDR5 RDIMM modules, and which step do people most often get wrong?

Power down the server, open the chassis, align each module notch with the slot key, press firmly until the latches click, then repeat for all 12 slots following the motherboard population guide; the common error is skipping the guide and leaving a channel unbalanced.

What maintenance or replacement will this 1.5TB kit need during its service life?

The modules have no heat spreaders and no moving parts, so no routine maintenance is required; if a module fails, replace the individual 128GB stick rather than the full kit.

What is the first limit that appears when the 5600 MT/s registered ECC memory runs under sustained load?

The CL46 latency at 1.10V sets the timing ceiling; sustained throughput is bounded by the DDR5 5600 transfer rate and the 4Rx4 organisation of each module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.