We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in a grid layout

NEMIX RAM

NEMIX RAM 1.5TB 16x96GB DDR5 6400MHz PC5-51200 2Rx4 CL52 1.1V ECC RDIMM memory upgrade

SKU CH-WAR5-VQXMQ

A 1.5 TB registered ECC DDR5 kit of sixteen 96 GB modules at 6400 MHz, CL52, 1.1 V, 2Rx4, validated for Supermicro X14QBH+ motherboards

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 1.5TB 16X96GB

Show 8 more configurations
  • Massive 1.5 TB capacity from 16 x 96 GB modules
  • DDR5 6400 speed with CL52 latency for responsive server workloads
  • Registered ECC design prevents silent data corruption under full load
  • 1 V operation at 2Rx4 rank for stable full-population performance
  • Exact-match kit validated for Supermicro X14QBH+ motherboard

Exact-match 1.5 TB DDR5 server kit

This NEMIX RAM kit delivers 1.5 TB through 16 modules of 96 GB each, running at DDR5 6400 (PC5-51200) with CL52 latency at 1.1 V. The 2Rx4 registered ECC RDIMMs use 288-pin form factor and are validated for the Supermicro X14QBH+ motherboard.

Suited for fully populated memory arrays

Administrators expanding a Supermicro X14QBH+ to its maximum supported capacity with registered ECC modules will find the correct rank, voltage and timing pre-matched. Builders needing unbuffered UDIMMs, SODIMMs, non-ECC memory or lower-density kits should look at something else.

Check manual before ordering

Verify the motherboard manual for approved DIMM population order, maximum capacity per slot and any BIOS version requirements for 96 GB modules. Confirm the system accepts 2Rx4 registered ECC RDIMMs at 1.1 V and that all 16 slots are available for installation.

Highlights

  • Massive 1.5 TB capacity from 16 x 96 GB modules
  • DDR5 6400 speed with CL52 latency for responsive server workloads
  • Registered ECC design prevents silent data corruption under full load
  • 1 V operation at 2Rx4 rank for stable full-population performance
  • Exact-match kit validated for Supermicro X14QBH+ motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What motherboard must I already have for this 16-module kit to be recognised at its rated 6400MHz speed?

The kit is verified for the Supermicro X14QBH+ motherboard running DDR5 6400MHz PC5-51200; the board must provide 288-pin RDIMM slots and the correct memory-population rules.

Will the 2Rx4 registered ECC modules work if I keep older DDR5 RDIMMs in the remaining slots?

Mixing ranks or capacities can prevent full-speed operation; the motherboard manual should be consulted for approved population order before adding these 96GB modules alongside existing DIMMs.

How do I confirm the full 1.5TB kit is running at CL52 1.1V with ECC active after installation?

Enter the BIOS or UEFI and verify the reported capacity, speed, voltage, latency and ECC status match the kit specifications, then run a memory diagnostic to validate stability.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.