We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, bare circuit boards with gold edge connectors and black memory chips

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM Supermicro X14SRG-TF

SKU CH-HT9W-GFJ45

128GB DDR5 ECC RDIMM kit (2×64GB) at 5600 CL46 1.1V for Supermicro X14SRG-TF

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

Show 4 more configurations
  • 128 GB total capacity from two 64 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • CL46 CAS latency at 1.1 V operating voltage
  • 2Rx4 registered ECC RDIMM for server stability
  • 288-pin form factor matched to Supermicro X14SRG-TF

Exact-match upgrade kit

This 128GB kit contains two 64GB DDR5 RDIMM modules rated at 5600 speed with CL46 latency and 1.10V operation. It is built for the Supermicro X14SRG-TF motherboard where the memory controller expects this precise rank, voltage and timing combination.

Registered DDR5 interface

The 288-pin RDIMM form factor uses registered architecture that buffers address and command signals so the memory controller can drive a fully populated configuration. ECC functionality corrects single-bit errors on the fly to prevent silent data corruption in production workloads.

128GB capacity headroom

Two 64GB dual-rank modules fill two slots at the rated DDR5 5600 frequency. Builders needing more total memory or a different DIMM population layout must verify the motherboard manual for supported capacities and approved slot order before purchase.

Highlights

  • 128 GB total capacity from two 64 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • CL46 CAS latency at 1.1 V operating voltage
  • 2Rx4 registered ECC RDIMM for server stability
  • 288-pin form factor matched to Supermicro X14SRG-TF

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick a different capacity kit or is this 128GB (2x64GB) kit the right one for my Supermicro X14SRG-TF?

This exact-match 128GB kit provides two 64GB DDR5-5600 RDIMMs at 1.1V CL46 2Rx4, matching the board's required registered ECC form factor and population rules.

What does the 5600MHz rating actually deliver once installed in the Supermicro X14SRG-TF?

The modules run at DDR5-5600 (PC5-44800) with CL46 latency at 1.1V, giving the full rated throughput the memory controller expects when all slots are populated.

How does the 288-pin RDIMM interface and registered ECC design affect real-world stability?

The registered buffer offloads the controller so every slot runs fully populated at 5600MT/s, while on-die ECC corrects single-bit errors on the fly to prevent silent data corruption.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.