SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.004997BTC
In stock
NEMIX RAM
NEMIX RAM 128GB 2x64GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H14DSG-OM memory upgrade
128 GB DDR5-6400 ECC registered RDIMM kit (2 × 64 GB, CL52, 1.1 V) validated for the Supermicro H14DSG-OM motherboard
- Capacity128GB (2 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 128 GB capacity from two 64 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- ECC and registered design prevents silent data corruption
- 288-pin RDIMM form factor matches Supermicro H14DSG-OM
- Lifetime replacement warranty with US-based technical support
System-specific DDR5 ECC RDIMM kit
This 128GB kit contains two 64GB DDR5 6400 registered ECC modules built for the Supermicro H14DSG-OM motherboard. It targets administrators who need the exact rank, voltage and timing the platform expects so the full capacity is recognised and runs at its rated speed.
Verified 288-pin registered form factor
The modules use the 288-pin RDIMM form factor this board requires, not UDIMM or SODIMM, and are spec-matched to the motherboard's population rules. Installation follows the manual's approved DIMM order; skipping that step is the most common reason a kit is not recognised at full capacity.
Registered architecture with ECC under load
Registered buffering offloads the memory controller so every slot runs fully populated at 6400 MT/s, while ECC corrects single-bit errors on the fly. This prevents silent data corruption and unplanned reboots during sustained production workloads.
Highlights
- 128 GB capacity from two 64 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- ECC and registered design prevents silent data corruption
- 288-pin RDIMM form factor matches Supermicro H14DSG-OM
- Lifetime replacement warranty with US-based technical support
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K2 |
| Capacity | 128GB (2 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 2X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
How do I verify the 128GB kit is running at DDR5 6400 CL52 after installing it in my Supermicro H14DSG-OM?
Check the BIOS memory information screen or use a tool like dmidecode; it should show both 64GB RDIMMs at 6400 MT/s, CL52, 1.10 V, registered ECC, 2Rx4 organization.
What exactly ships in the box and is anything else required for installation?
The package contains the 128GB 2×64GB DDR5 6400 CL52 1.10 V ECC RDIMM kit (part MR51200-924K2); no extra cables, brackets or software are included or needed.
My H14DSG-OM has multiple DIMM slots — which capacity configuration should I choose?
This 128GB kit provides two 64GB 2Rx4 registered DIMMs; follow the motherboard manual's population order for the total capacity you need.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
