We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in a matched kit

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 5600 CL46 2Rx8 1.1V ECC RDIMM Supermicro X14SRG-TF memory upgrade

SKU CH-CYP9-YKWGX

128 GB DDR5-5600 registered ECC kit in four 32 GB modules at CL46 and 1.1 V for the Supermicro X14SRG-TF

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

Show 4 more configurations
  • 128 GB total capacity from four 32 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency and 1.1 V operation for rated performance
  • Registered ECC RDIMM architecture corrects single-bit errors and supports full population
  • Exact-match 288-pin form factor verified for Supermicro X14SRG-TF motherboard
  • Built with major OEM Samsung, Micron or Hynix DRAM chips for enterprise stability

Exact-fit DDR5 RDIMM kit for Supermicro X14SRG-TF

This 128GB kit delivers four 32GB DDR5 5600 registered ECC modules built to the board's native 288-pin RDIMM specification. It targets administrators who need guaranteed recognition at full capacity without manual tuning.

Four dual-rank 32GB modules at CL46 and 1.1V

The 2Rx8 organization and registered buffer let all four slots run fully populated at the rated 5600 MT/s data rate. ECC corrects single-bit errors on the fly, protecting workloads that cannot tolerate silent corruption.

Standard-voltage operation with no heat spreaders

At 1.1V the modules stay within JEDEC baseline power, so airflow designed for the chassis is sufficient. The bare PCB design fits dense server layouts where tall heat spreaders would block adjacent slots or airflow paths.

Highlights

  • 128 GB total capacity from four 32 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency and 1.1 V operation for rated performance
  • Registered ECC RDIMM architecture corrects single-bit errors and supports full population
  • Exact-match 288-pin form factor verified for Supermicro X14SRG-TF motherboard
  • Built with major OEM Samsung, Micron or Hynix DRAM chips for enterprise stability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 128GB DDR5 5600 kit run at full speed alongside the 32GB modules already installed in my Supermicro X14SRG-TF?

The kit is validated for the Supermicro X14SRG-TF at DDR5 5600 with CL46 timings and 1.1V. Mixing different capacities or ranks can force the memory controller to downclock or disable ECC, so the board manual should be checked for supported population rules before combining kits.

How can I confirm the 4x32GB RDIMM set is operating at 5600 MT/s with ECC active after installation?

Enter the BIOS or use a tool such as dmidecode to verify each DIMM reports 5600 MT/s, CL46, 1.1V, 2Rx8 registered ECC. The Supermicro IPMI interface also logs memory speed, rank configuration and ECC status during POST.

Does the package contain only the four 32GB DDR5 RDIMMs or are heat spreaders and installation hardware included?

The box contains the 128GB kit as four 32GB 288-pin DDR5 RDIMMs with no heat spreaders. No brackets, screws or thermal pads are supplied; the modules install directly into the motherboard DIMM slots.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.