We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 desktop memory modules, no heat spreader, 240-pin

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1333MHz 240-Pin Desktop RAM

SKU CH-S4G5-XSZYA

A 16GB dual-channel DDR3 kit running at 1333MHz with CL9 latency for desktop upgrades

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo

Capacity 16GB (2 x 8GB)

  • 16 GB kit boosts multitasking headroom with two 8 GB modules
  • DDR3 1333 MHz PC3-10600 speed matches legacy platform specs
  • CL9 latency at 1.50 V keeps timing tight for stable throughput
  • Unbuffered non-ECC UDIMM drops straight into standard desktop boards
  • Major OEM Samsung Micron Hynix chips validated under load for reliability

Capacity and Kit Format

This NEMIX RAM kit delivers 16GB of DDR3 desktop memory across two 8GB UDIMM modules. The 240-pin DIMMs are unbuffered and non-ECC, making them suitable for standard consumer motherboards that support DDR3 1333 speeds.

Upgrade Path and Value

The kit replaces older DDR3 modules running at lower frequencies or smaller capacities such as 4GB sticks. Moving to this PC3-10600 CL9 kit is worthwhile when your board supports 1333MHz operation and you need more multitasking headroom for everyday workloads.

Compatibility Checklist

Verify that your motherboard accepts 240-pin DDR3 UDIMMs at 1.50V and can run at 1333MHz with CL9 timings. Confirm the board supports 8GB density per slot and that no ECC or registered memory is required for your specific platform.

Highlights

  • 16 GB kit boosts multitasking headroom with two 8 GB modules
  • DDR3 1333 MHz PC3-10600 speed matches legacy platform specs
  • CL9 latency at 1.50 V keeps timing tight for stable throughput
  • Unbuffered non-ECC UDIMM drops straight into standard desktop boards
  • Major OEM Samsung Micron Hynix chips validated under load for reliability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD10600-828LK2
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does this kit use 240-pin DDR3 UDIMM modules that fit standard desktop DIMM slots?

Yes, each module is a 240-pin DDR3 UDIMM measuring the standard desktop length and keyed for non-ECC unbuffered slots.

What is the correct way to seat the two 8 GB sticks so the motherboard recognises the full 16 GB?

Align the notch on each module with the slot key, press straight down until the retention clips click on both ends, then verify in BIOS that both channels show 8 GB each.

Will the 1.50 V operating voltage require any cooler cleaning or paste replacement over time?

No, these modules have no heat spreader and run at standard JEDEC voltage, so they need no active cooling maintenance or thermal-paste service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.