NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 1.2V 288-pin UDIMM
A 16 GB DDR4 kit running at 3200 MHz with CL22 latency and 1.2 V across two 288-pin UDIMM modules
- Capacity16GB (2 x 8GB)
- Type288-Pin DDR4 UDIMM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCNo
- 16 GB dual-channel kit boosts multitasking headroom with two 8 GB modules
- DDR4 3200 speed feeds data to the CPU at PC4-25600 bandwidth
- CL22 latency keeps response times tight for everyday workloads
- 20 V operation reduces power draw and heat output
- 288-pin UDIMM form factor fits standard desktop DIMM slots
16GB DDR4 3200 kit for desktop upgrades
This 16GB kit contains two 8GB DDR4 3200 UDIMM modules rated at CL22 and 1.20V. It targets desktop users who want a straightforward memory increase for everyday workloads. The unbuffered non-ECC design fits standard consumer motherboards that accept 288-pin DDR4 memory. NEMIX RAM builds each module with major OEM chips from Samsung, Micron or Hynix.
Verify DDR4 slot count and maximum speed support
Before ordering, confirm your motherboard has at least two free 288-pin DDR4 slots and supports DDR4 3200 operation. Check the board manual for the qualified vendor list to ensure CL22 1.20V modules are validated. The kit runs at PC4-25600 data rate, so the platform must be able to train at that frequency. No heat spreader is fitted, so verify clearance if large CPU coolers are present.
Sustained load stability from factory stress testing
Every module undergoes extended stress testing under load before shipment to verify long-term reliability. The 1Rx6 organisation and standard 1.20V operation keep thermals predictable during continuous workloads such as rendering or virtualisation. Without a heat spreader, airflow across the PCB becomes the primary cooling path, so case ventilation should be adequate. The lifetime replacement warranty reflects the manufacturer's confidence in sustained operation.
Highlights
- 16 GB dual-channel kit boosts multitasking headroom with two 8 GB modules
- DDR4 3200 speed feeds data to the CPU at PC4-25600 bandwidth
- CL22 latency keeps response times tight for everyday workloads
- 20 V operation reduces power draw and heat output
- 288-pin UDIMM form factor fits standard desktop DIMM slots
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS Series Server Motherboard Memory |
| Model | ASUS Compatible DDR4 3200MHZ Non-ECC UDIMM |
| Part Number | MD25600-816K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx6 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC UDIMM Motherboard Compatible |
Questions about this item
Does the 16GB kit ship as two 8GB modules or do I need to buy a second stick separately?
The kit contains two 8GB modules for a total of 16GB so nothing extra is required.
Why is this kit labelled CL22 instead of a lower latency and will it still run at 3200?
CL22 is the rated CAS latency for these 3200 MT/s modules; they operate at the advertised speed with that timing.
My board only has standard 288-pin DDR4 slots — will the 3200 MT/s rating actually be reached without manual tuning?
The modules run at 1.20V and conform to the standard DDR4 3200 JEDEC profile so they should hit 3200 MT/s automatically on compatible boards.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
$274.89
0.00356481BTC
In stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
$324.03
0.00420207BTC
In stock