We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board 288 pin DDR4 UDIMM 16GB 2133 CL15 1.2V no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2133 CL15 1.2V 288-Pin UDIMM NAS QNAP RAM-16GDR4-LD-2133

SKU CH-ZMS4-TVQF3

A 16GB DDR4 2133 CL15 UDIMM module at 1.2V for compatible QNAP NAS systems

  • Capacity16GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCNo
  • Boost system responsiveness with 16GB DDR4 capacity
  • Stable operation at 2133MHz PC4-17000 speed
  • Low 1.2V voltage reduces power draw
  • CL15 latency supports smooth multitasking
  • 288-pin UDIMM fits QNAP NAS and desktop boards

Capacity and compatibility

This 16GB DDR4 module targets NAS and desktop upgrades where non-ECC unbuffered memory is required. The single stick fits 288-pin UDIMM slots and matches QNAP part RAM-16GDR4-LD-2133 for direct replacement.

Speed and voltage limits

DDR4 2133 at CL15 sets the practical bandwidth ceiling at PC4-17000 while the 1.20V operating voltage keeps power draw within standard desktop limits. No heat spreader is present, so airflow across the PCB handles thermal load.

Build and daily handling

Major OEM chips from Samsung, Micron or Hynix are assembled without LEDs or a spreader, keeping the profile low for tight NAS bays. The bare green PCB means installers should hold edges only and avoid flexing the module during insertion.

Highlights

  • Boost system responsiveness with 16GB DDR4 capacity
  • Stable operation at 2133MHz PC4-17000 speed
  • Low 1.2V voltage reduces power draw
  • CL15 latency supports smooth multitasking
  • 288-pin UDIMM fits QNAP NAS and desktop boards

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD17000-628K1
Capacity16GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Questions about this item

Will this module fit my QNAP NAS that specifies the RAM-16GDR4-LD-2133 part number?

Yes, the supplier lists this module as compatible with that exact QNAP part number.

My motherboard has four 288-pin DDR4 slots — can I add this 16 GB stick alongside my existing memory?

The module is a standard 288-pin DDR4 UDIMM, so it will physically install in any DDR4 slot; check your board manual for maximum capacity per slot and total system limit.

Does the CL15 timing at 2133 MT/s require any voltage change in the BIOS?

The module operates at the standard 1.20 V, so no voltage adjustment is needed; the system should apply the correct timing automatically.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.