We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board memory module with gold edge connector and black chips

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 ECC UDIMM CL19 1.2V 288-Pin ASUS LOCKERSTOR NAS Memory

SKU CH-Y486-A4DW1

16 GB DDR4-2666 ECC UDIMM module with CL19 latency and 1.2 V operation for ASUS Lockerstor NAS

  • Capacity16GB
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • ECC protection prevents data corruption in critical NAS workloads
  • 2666 MHz DDR4 speed matches ASUS Lockerstor specifications
  • 2 V operation reduces power draw and heat
  • 1Rx8 single-rank layout ensures broad motherboard compatibility
  • 288-pin UDIMM form factor fits standard DDR4 slots

16GB DDR4 2666 ECC UDIMM for ASUS LOCKERSTOR NAS

This NEMIX RAM module provides 16GB of DDR4 2666 memory in a single 288-pin UDIMM. It operates at CL19 latency with a 1.20V voltage. The unbuffered ECC design uses a 1Rx8 configuration built with major OEM chips.

Suits ASUS LOCKERSTOR NAS owners adding ECC capacity

Buyers who need registered DIMMs or a heat spreader should look elsewhere. Systems requiring speeds above 2666MT/s or lower CAS latency than CL19 are not supported by this module. Non-ECC platforms cannot use the error-correction feature.

ECC unbuffered UDIMM decides compatibility

The module is an unbuffered ECC UDIMM, so it only works in platforms that accept that exact memory type. Buffered or registered memory slots will not accept it. Verify your NAS or motherboard specifies unbuffered ECC UDIMM support before purchase.

Highlights

  • ECC protection prevents data corruption in critical NAS workloads
  • 2666 MHz DDR4 speed matches ASUS Lockerstor specifications
  • 2 V operation reduces power draw and heat
  • 1Rx8 single-rank layout ensures broad motherboard compatibility
  • 288-pin UDIMM form factor fits standard DDR4 slots

Specifications

BrandNEMIX RAM
SeriesASUS LOCKERSTOR NAS Memory
ModelASUS LOCKERSTOR NAS Memory
Part NumberME21300-618K1
Capacity16GB
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible

Questions about this item

How do I install this 288-pin DDR4 ECC UDIMM in my ASUS LOCKERSTOR NAS and what step is often missed?

Power off the NAS, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until the retention clips click, then power on and verify the 16GB capacity in the system BIOS or DSM info page — the step often missed is confirming the module shows at the rated 2666 speed.

What maintenance or replacement will this 1Rx8 ECC UDIMM need over time?

No routine maintenance is required; ECC corrects single-bit errors automatically, but if the NAS logs uncorrectable memory errors or fails to boot, the 16GB stick should be replaced.

What limit appears first when this CL19 1.2V module runs sustained workloads?

The CAS latency of CL19 at 2666 MT/s sets the access timing ceiling, and the fixed 1.20V operating voltage limits headroom for extended heavy use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.