We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 RDIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 RDIMM ECC 2Rx8 CL21 1.2V 288-Pin Dell PowerEdge R740xd memory upgrade

SKU CH-BFW4-Y9H8G

16 GB DDR4-2933 ECC registered RDIMM for Dell PowerEdge R740xd servers

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 2933 MT/s throughput matches Dell PowerEdge R740xd specifications
  • 2 V operation reduces power draw per module
  • 2Rx8 organisation maximises capacity per DIMM slot

Dell PowerEdge R740xd 16GB RDIMM upgrade

This 16GB DDR4 2933MHz registered ECC module is built for the Dell PowerEdge R740xd server. It installs in a single 288-pin slot and operates at 1.2V with CL21 latency. The 2Rx8 organisation and PC4-23400 rating match the platform's memory subsystem.

Suited for administrators expanding R740xd capacity

IT teams adding memory to a Dell PowerEdge R740xd will find this module validated for that system. Buyers who need unbuffered UDIMMs, non-ECC memory, or a different pin count should look elsewhere. The registered design and ECC function are required by the target server.

288-pin DDR4 RDIMM form factor decides fit

Only systems that accept 288-pin DDR4 registered DIMMs with ECC can use this part. The physical keying, electrical signalling and register timing are fixed by the DDR4 RDIMM standard. Confirm the motherboard supports registered ECC modules before purchase.

Highlights

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 2933 MT/s throughput matches Dell PowerEdge R740xd specifications
  • 2 V operation reduces power draw per module
  • 2Rx8 organisation maximises capacity per DIMM slot

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-628K1
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

How much power does this 1.2V DDR4 2933 RDIMM draw under sustained load?

The module operates at 1.20 V, the standard DDR4 voltage, so power draw per stick is low and heat output is minimal in a fully populated R740xd.

Does the Dell PowerEdge R740xd need a specific BIOS revision or riser card to recognise this 288-pin ECC registered module?

The stick is built to Dell's MR23400-628K1 specification; the server's existing memory controller and DIMM slots accept it without extra hardware.

Will this CL21 2Rx8 stick work alongside older DDR4 RDIMMs already in the R740xd?

The R740xd memory controller runs all installed DIMMs at a common speed and timing; mixing ranks or CAS values is supported but the system will downclock to the slowest module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.