We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1.1V 262-PIN SODIMM for BIOSTAR EdgeComp MS-N97

SKU CH-ZEWY-NP4TM

A 16 GB DDR5 SODIMM running at 4800 MHz with CL40 latency and 1.1 V operation, built for the BIOSTAR EdgeComp MS-N97 industrial PC

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 4800 MHz boosts multitasking speed
  • CL40 latency keeps data flowing smoothly
  • 1 V operation reduces power draw
  • 262-pin SODIMM fits BIOSTAR EdgeComp MS-N97
  • Samsung Micron Hynix chips ensure reliable performance

16 GB DDR5 SODIMM for BIOSTAR EdgeComp MS-N97

This module delivers 16 GB of DDR5 memory in a single 262-pin SODIMM. It is built for the BIOSTAR EdgeComp MS-N97 industrial PC and similar systems that require non-ECC unbuffered memory at 1.10 V.

CL40 latency at 4800 MT/s under continuous operation

The memory runs at 4800 MT/s with a CAS latency of 40, providing stable throughput for sustained workloads. The 1Rx8 organisation and standard voltage keep power draw predictable during extended sessions.

Major OEM chips, no heat spreader, plug-in upgrade

Samsung, Micron or Hynix ICs are used without a heat spreader, keeping the profile low for tight industrial chassis. The standard 262-pin edge connector allows a straightforward slot-in installation.

Highlights

  • 16 GB DDR5 4800 MHz boosts multitasking speed
  • CL40 latency keeps data flowing smoothly
  • 1 V operation reduces power draw
  • 262-pin SODIMM fits BIOSTAR EdgeComp MS-N97
  • Samsung Micron Hynix chips ensure reliable performance

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemBiostar
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1 x 16GB) DDR5 4800MHz PC5-38400 1Rx8 1.1V 262-PIN Non-ECC SODIMM

Questions about this item

Does the 1.10 V DDR5 module run cooler than higher-voltage memory in the BIOSTAR EdgeComp MS-N97?

The module operates at 1.10 V, the standard DDR5 voltage, so power draw and heat are typical for a 4800 MT/s SODIMM in continuous use.

What must the BIOSTAR EdgeComp MS-N97 already have for this 262-pin SODIMM to work?

The board needs a free DDR5 SODIMM slot that accepts 1.10 V, 262-pin, non-ECC unbuffered modules.

Can I run this CL40 4800 MT/s stick alongside slower DDR5 already installed in the MS-N97?

Yes, the system will run all modules at the speed of the slowest stick, so this CL40 4800 MT/s module will down-clock to match existing memory.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.