We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, black chips, no heat spreader, 288 pins

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 5600 CL46 2Rx4 1.1V ECC Registered RDIMM memory upgrade for Supermicro X14SRA-F

SKU CH-AVYG-JWFXB

192 GB DDR5-5600 registered ECC kit with two 96 GB modules at CL46 and 1.1 V for the Supermicro X14SRA-F

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Show 4 more configurations
  • 192 GB capacity from two 96 GB modules for dense server workloads
  • DDR5 5600 speed rated at CL46 latency for responsive data access
  • Registered ECC design corrects single-bit errors to protect data integrity
  • 1 V operation reduces power draw across fully populated slots
  • 288-pin RDIMM form factor matches Supermicro X14SRA-F memory slots

Exact-match server upgrade

This 192GB kit (2 x 96GB) DDR5 5600 PC5-44800 registered ECC RDIMM is built to the precise rank, voltage and timing the Supermicro X14SRA-F memory controller expects. The 2Rx4 modules operate at 1.1V with CL46 latency and install in the required 288-pin slots for immediate recognition at full rated speed.

Capacity and headroom

Two 96GB dual-rank modules deliver 192GB total, letting the board run fully populated without down-clocking. Registered architecture offloads the controller so every slot sustains 5600 MT/s, while on-die ECC corrects single-bit errors on the fly. Headroom ends when the platform's maximum supported capacity or channel population limit is reached.

Replaces partial or slower kits

The kit upgrades configurations that currently run lower-capacity RDIMMs, slower DDR5 speeds or unbuffered memory that cannot fill every slot. The jump is worth it when workloads need the full 192GB at native 5600 MT/s with registered ECC stability, and the system manual confirms this exact population order.

Highlights

  • 192 GB capacity from two 96 GB modules for dense server workloads
  • DDR5 5600 speed rated at CL46 latency for responsive data access
  • Registered ECC design corrects single-bit errors to protect data integrity
  • 1 V operation reduces power draw across fully populated slots
  • 288-pin RDIMM form factor matches Supermicro X14SRA-F memory slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 192GB DDR5 5600 kit mix with other DDR5 5600 RDIMMs I already have in the Supermicro X14SRA-F?

This kit uses 2Rx4 registered ECC DDR5 at 1.1V and CL46. Mixing works only if the other modules match the same rank, voltage, timing and registered architecture; otherwise the memory controller may downclock or disable slots.

How can I confirm the Supermicro X14SRA-F is running this 192GB kit at DDR5 5600 CL46 after installation?

Enter the BIOS or UEFI and verify the memory speed shows 5600 MT/s with CAS latency 46, that both 96GB modules are detected for a total of 192GB, and that ECC status reports as active.

What does the MR44800-9624K2 package contain and what else must I source?

The box includes two 96GB 288-pin DDR5 5600 CL46 1.1V ECC registered RDIMMs. No heat spreaders, cables, tools or additional hardware are supplied; only compatible motherboard slots are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.