SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.0049963BTC
In stock
NEMIX RAM
NEMIX RAM 192GB 2x96GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H13SVW-N memory upgrade
A 192 GB DDR5 ECC registered DIMM kit, two 96 GB modules at 6400 MT/s CL52 1.1 V, validated for the Supermicro H13SVW-N motherboard
- Capacity192GB (2 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB total capacity from two 96 GB modules for dense server workloads
- DDR5 6400 speed rated at PC5-51200 for high-throughput data paths
- Registered ECC RDIMM with 2Rx4 organisation corrects single-bit errors and buffers the memory bus
- 10 V operation at CL52 latency matches the board's memory controller specification
- 288-pin form factor validated for the Supermicro H13SVW-N motherboard
Exact-match DDR5 RDIMM kit for Supermicro H13SVW-N
This 192GB kit contains two 96GB DDR5 6400 registered ECC modules built to the 288-pin RDIMM form factor the H13SVW-N requires. The 2Rx4 organisation, 1.10V operating voltage and CL52 latency match the board's memory controller expectations so the full capacity is recognised at rated speed.
Server administrators who need registered ECC
The registered architecture offloads the memory controller for reliable operation when every slot is populated, while on-die ECC corrects single-bit errors before they affect production workloads. Buyers who need unbuffered UDIMMs, SODIMM form factors or non-ECC memory should look elsewhere because this kit is neither mechanically nor electrically compatible with those requirements.
2Rx4 rank organisation at 1.10V
The dual-rank 2Rx4 configuration at the specified voltage is the single specification that determines whether the motherboard will initialise the full 192GB at DDR5 6400; a different rank structure or voltage would prevent proper training and reduce usable capacity.
Highlights
- 192 GB total capacity from two 96 GB modules for dense server workloads
- DDR5 6400 speed rated at PC5-51200 for high-throughput data paths
- Registered ECC RDIMM with 2Rx4 organisation corrects single-bit errors and buffers the memory bus
- 10 V operation at CL52 latency matches the board's memory controller specification
- 288-pin form factor validated for the Supermicro H13SVW-N motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K2 |
| Capacity | 192GB (2 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 2X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
How do I install the 288-pin RDIMM modules in the Supermicro H13SVW-N, and which step is commonly missed?
Power down the server, open the chassis, and insert each 96GB module into the DIMM slots following the motherboard manual's population order for 2Rx4 registered DIMMs; the step most often missed is verifying the population sequence before powering on.
What maintenance or replacement will the 192GB DDR5 ECC RDIMM kit need over its service life?
No routine maintenance is required; the modules have no heat spreader and operate at 1.10V, so only a DIMM failure would trigger replacement under the lifetime warranty.
What limit appears first when the 2x96GB DDR5-6400 CL52 kit runs sustained workloads?
The memory controller's maximum supported capacity and population rules for 2Rx4 registered DIMMs on the H13SVW-N board will limit how many kits can be installed before the rated 6400 MT/s speed or stability is affected.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
