We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 192GB (6 x 32GB) DDR5 6400 CL52 2Rx8 1.1V ECC RDIMM Supermicro H13SSW memory upgrade

SKU CH-XQXK-WH2JG

192GB DDR5 6400 CL52 ECC RDIMM kit of six 32GB modules verified for Supermicro H13SSW servers

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 192 GB total capacity from six 32 GB modules
  • DDR5 6400 speed with CL52 latency for rated performance
  • 1 V registered ECC RDIMM architecture reduces controller load
  • 288-pin 2Rx8 form factor matches Supermicro H13SSW slot requirements
  • ECC corrects single-bit errors to prevent silent data corruption

Supermicro H13SSW DDR5 ECC RDIMM kit

This 192GB kit contains six 32GB DDR5 6400 registered ECC modules built to the exact rank, voltage and timing the Supermicro H13SSW memory controller expects. It is intended for administrators who need to populate every slot with validated capacity.

DDR5 6400 registered ECC limits

Registered DDR5 at 6400 MT/s with CL52 and 1.1V lets the memory controller drive a fully populated board without signal degradation, while ECC corrects single-bit errors before they reach the operating system. The board's own population rules still dictate which slots must be filled first and the maximum capacity per channel.

288-pin RDIMM installation notes

The 288-pin RDIMM form factor keys only one way into the H13SSW slots; align the notch, press evenly until the latches click, then verify the BIOS reports all 192GB at DDR5-6400. A common issue is skipping the manual's prescribed population order, which can leave capacity unrecognised or force a lower speed.

Highlights

  • 192 GB total capacity from six 32 GB modules
  • DDR5 6400 speed with CL52 latency for rated performance
  • 1 V registered ECC RDIMM architecture reduces controller load
  • 288-pin 2Rx8 form factor matches Supermicro H13SSW slot requirements
  • ECC corrects single-bit errors to prevent silent data corruption

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Should I choose the 192GB 6 x 32GB kit or a different capacity for the Supermicro H13SSW?

The 192GB kit provides six 32GB modules that match the board's 288-pin RDIMM slots and population rules. Consult the motherboard manual for supported capacities and approved DIMM order before deciding.

What does the DDR5 6400 speed mean once the modules are installed in the server?

The memory controller will recognise the kit at its rated 6400 MT/s (PC5-51200) with CL52 latency and 1.1V, delivering the full bandwidth the platform expects when all slots are populated.

How does the 288-pin RDIMM interface and registered ECC design affect real-world operation?

The registered architecture buffers address and command signals so every slot runs fully populated at 6400 MT/s, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.