We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules in a kit, no heat spreader

NEMIX RAM

NEMIX RAM 192GB DDR5 5600 ECC RDIMM 2Rx4 1.1V CL46 288-pin kit Supermicro H13SSF

SKU CH-WCR2-1FS60

A 192 GB DDR5 5600 RDIMM kit with ECC and registered buffering for the Supermicro H13SSF motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 192 GB total capacity from two 96 GB modules
  • DDR5 5600 speed for high-throughput server workloads
  • Registered ECC design prevents silent data corruption
  • 1 V operation matches platform voltage spec
  • Verified fitment for Supermicro H13SSF motherboard

Capacity and fit

This is a 192GB DDR5 kit built as two 96GB Registered ECC RDIMMs for the Supermicro H13SSF motherboard. It targets administrators who need the full supported capacity in a two-slot configuration with verified population rules.

Upgrade path and timing

The kit replaces any lower-density RDIMM set that leaves slots empty or forces mixed-rank operation. The jump is worth it when the workload needs the full 192GB at the board-rated 5600 MT/s without down-clocking caused by rank or voltage mismatches.

Install notes and pitfalls

Installation follows the H13SSF manual slot order for two DIMMs; the 288-pin registered form factor key prevents mis-insertion. Common issues are skipping the manual population sequence, mixing these 2Rx4 modules with other ranks, or forgetting to enable ECC in BIOS after seating both sticks.

Highlights

  • 192 GB total capacity from two 96 GB modules
  • DDR5 5600 speed for high-throughput server workloads
  • Registered ECC design prevents silent data corruption
  • 1 V operation matches platform voltage spec
  • Verified fitment for Supermicro H13SSF motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Will the 288-pin RDIMM modules fit the Supermicro H13SSF motherboard slots?

Yes, the 288-pin DDR5 RDIMM form factor matches the slots required by the Supermicro H13SSF motherboard.

What is the correct installation order for the two 96GB modules on the H13SSF?

Consult the motherboard manual for the approved DIMM population sequence before installing the 2Rx4 registered modules.

Does the 1.1V operating voltage affect long-term reliability of these Samsung, Micron or Hynix chips?

The 1.10V specification is the standard DDR5 voltage for these major OEM chips and supports stable enterprise operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.