We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM 1TB DDR5 6400 8x128GB CL52 1.1V 2Rx4 ECC RDIMM Supermicro H14DSH memory upgrade

SKU CH-ZRYD-J91HM

Eight 128 GB DDR5 registered ECC RDIMMs deliver 1 TB at 6400 MT/s with CL52 latency and 1.1 V operation for the Supermicro H14DSH

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 1TB capacity across eight 128GB modules
  • DDR5-6400 speed with CL52 latency
  • 1V registered ECC for data integrity
  • 2Rx4 288-pin RDIMM fits Supermicro H14DSH
  • Major OEM Samsung, Micron, Hynix chips

Exact-match 1 TB DDR5 kit

This 1 TB kit contains eight 128 GB DDR5 6400 Registered ECC RDIMMs built for the Supermicro H14DSH motherboard. The 2Rx4 rank structure, 1.1 V operating voltage and CL52 timing match the board's memory-controller requirements so the full capacity is recognised at rated speed. It is intended for administrators who need maximum supported memory in that specific platform. ||

Sustained-load behaviour

Registered buffering offloads the memory controller, allowing all eight slots to remain fully populated at 6400 MT/s without signal degradation. ECC detects and corrects single-bit errors on the fly, preventing silent data corruption during long-running workloads. The modules run at the standard 1.1 V, so thermal output stays within the server's designed cooling envelope. ||

Installation notes

The 288-pin RDIMM form factor fits only the H14DSH's registered DIMM slots; UDIMM or SODIMM modules will not seat. Population order is defined by the motherboard manual and must be followed exactly or the system will not post. No heat spreaders are present, so airflow across the bare modules must be maintained by the chassis fans.

Highlights

  • 1TB capacity across eight 128GB modules
  • DDR5-6400 speed with CL52 latency
  • 1V registered ECC for data integrity
  • 2Rx4 288-pin RDIMM fits Supermicro H14DSH
  • Major OEM Samsung, Micron, Hynix chips

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

How much power does the 1.1 V DDR5 kit draw when the H14DSH runs fully populated 24/7?

Each module operates at 1.10 V. Registered ECC RDIMMs reduce electrical load on the memory controller, so eight 128 GB sticks stay within the board's power budget during continuous operation.

What must the H14DSH already have to accept this 8 x 128 GB RDIMM kit?

The motherboard needs eight free 288-pin DDR5 RDIMM slots and a BIOS that supports 2Rx4 registered ECC modules at 6400 MT/s. No UDIMM or SODIMM slots will work.

Will the CL52 6400 MT/s modules down-clock automatically if I keep older DDR5 RDIMMs in the same H14DSH?

The board runs all populated slots at a single common speed. Mixing different DDR5 RDIMM speeds forces the faster kit to run at the slower modules' highest supported rate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.