NEMIX RAM 256GB (4x64GB) DDR4 2400 CL17 ECC LRDIMM 288-Pin memory upgrade
- 256GB (4 x 64GB)
- DDR4 2400 (PC4 1920…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
256 GB DDR4 server kit with four 64 GB ECC load-reduced DIMMs at 2933 MHz CL21, 1.2 V, 288-pin
Capacity 256GB 4X64GB
This kit provides 256GB of DDR4 2933 memory across four 64GB load-reduced DIMMs. It targets administrators upgrading ASRock Rack ROMED8-2T motherboards running AMD EPYC processors where registered ECC capacity is required.
Each module uses a 4Rx4 organisation with CL21 latency and operates at 1.20V. The load-reduced design reduces electrical load on the memory controller, allowing the full 256GB kit to populate all four slots without exceeding the platform's rank-per-channel limits.
Confirm the motherboard firmware supports 64GB LRDIMMs at 2933MT/s and review the vendor's memory population guide for correct slot order. The kit contains no heat spreaders, so chassis airflow must meet the server's thermal specification for high-density memory configurations.
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Server Motherboard Compatible Series Memory |
| Model | ASRock DDR4 2666MHZ ECC LRDIMM Load Reduced Server Memory |
| Part Number | ML23400-944K4 |
| Capacity | 256GB (4 x 64GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASRock |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 LRDIMM |
| Rank | 4Rx4 |
| Features | DDR4 ECC LRDIMM Load Reduced Server Motherboard Compatible |
| Package Content | 256GB (4X64GB) DDR4 2933MHZ PC4-23400 4Rx4 1.2V CL21 288-PIN ECC LRDIMM Load Reduced Server Memory KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit is built from major-brand DRAM and tested under load for the ASRock ROMED8-2T; no extra firmware steps are required beyond normal BIOS memory training.
The 1.20 V operating voltage and 288-pin DDR4 LRDIMM electrical spec define the sustained envelope; the memory controller on the EPYC platform will throttle before the modules exceed their rated speed.
With no heat spreader and a 1.2 V load-reduced design, the modules rely on chassis airflow; typical server fan curves keep them within normal DDR4 thermal limits without adding audible noise.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?