SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00497027BTC
In stock
NEMIX RAM
NEMIX RAM 256GB (4x64GB) DDR5 5600 CL46 ECC RDIMM for ASRock Rack TURIND12M3-2Q/E810
256 GB kit of four 64 GB DDR5 5600 CL46 ECC registered DIMMs at 1.1 V for the ASRock Rack TURIND12M3-2Q/E810
- Capacity256GB (4 x 64GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256 GB total capacity from four 64 GB modules
- DDR5 5600 speed with PC5-44800 bandwidth rating
- ECC registered design detects and corrects data errors
- Low 1.1 V operating voltage reduces power draw
- CL46 latency and 2Rx4 organisation optimise server throughput
256GB DDR5 5600 ECC RDIMM kit
This 256GB kit contains four 64GB DDR5 5600 registered DIMMs with ECC and a CL46 latency. It operates at 1.10V and uses a 2Rx4 organisation on 288-pin modules. The memory is validated for the ASRock Rack TURIND12M3-2Q/E810 motherboard.
Upgrading from lower-capacity DDR5 RDIMMs
The kit replaces smaller registered DDR5 sets when the workload demands more addressable memory per channel. The jump is worth it when the platform supports the full 256GB population and the application can use the extra capacity without exceeding the board's memory topology limits.
Suited for memory-intensive server workloads
Builders who need maximum registered ECC capacity on the qualified ASRock Rack board will benefit from the four-module kit. Buyers who want non-ECC memory, unbuffered DIMMs, or a different DDR generation should look at something else.
Highlights
- 256 GB total capacity from four 64 GB modules
- DDR5 5600 speed with PC5-44800 bandwidth rating
- ECC registered design detects and corrects data errors
- Low 1.1 V operating voltage reduces power draw
- CL46 latency and 2Rx4 organisation optimise server throughput
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K4 |
| Capacity | 256GB (4 x 64GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB (4 x 64GB) DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Does the 288-pin DDR5 RDIMM kit fit the ASRock Rack TURIND12M3-2Q/E810 motherboard slots?
Yes, the 4 x 64 GB kit is built for that motherboard and uses the standard 288-pin DDR5 RDIMM form factor.
What is the correct order for installing the four 2Rx4 modules on this board?
Populate the primary channel slots first as shown in the ASRock Rack manual, then add the remaining pair; skipping a channel slot is the common mistake.
When should the 256 GB ECC RDIMM kit be replaced or reseated?
Reseat if the server reports corrected ECC errors or fails POST; replace modules that log uncorrectable errors or no longer train at 5600 MT/s.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
