We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 server RDIMM modules, silver heat spreaders, 288-pin gold contacts

NEMIX RAM

NEMIX RAM 32GB (2 x 16GB) DDR4 2933MHz 2Rx8 ECC RDIMM server RAM

SKU CH-3GHJ-03GGC

32 GB dual-channel DDR4 kit with two 16 GB registered ECC modules running at 2933 MHz and CL21

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS Latency21
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB kit expands server memory capacity
  • ECC and registered design protects data integrity
  • 2933 MHz DDR4 speed supports demanding workloads
  • 2 V operation reduces power consumption
  • Dual-rank 2Rx8 organisation optimises bandwidth

Server-grade DDR4 kit

This 32 GB kit contains two 16 GB registered DIMMs built for servers that require DDR4 2933 operation. The modules carry ECC and a 2Rx8 organisation to protect data integrity in multi-socket or virtualised workloads. They are not suitable for standard desktop or laptop platforms.

Registered ECC integration

Each stick presents a 288-pin DDR4 interface and runs at 1.2 V, drawing power from the server’s memory controller without adding unbuffered signal load. The registered design reduces electrical stress on the memory bus, freeing the platform to populate more slots per channel. Systems without registered-DIMM support cannot use this memory.

Sustained 2933 throughput

Rated at PC4-23400 with CAS 21 latency, the modules maintain their rated transfer rate during extended compute or database tasks rather than throttling after short bursts. The dual-rank layout helps keep bandwidth stable across all populated channels under continuous load. Platforms limited to lower DDR4 speeds will clock the kit down automatically.

Highlights

  • 32 GB kit expands server memory capacity
  • ECC and registered design protects data integrity
  • 2933 MHz DDR4 speed supports demanding workloads
  • 2 V operation reduces power consumption
  • Dual-rank 2Rx8 organisation optimises bandwidth

Specifications

BrandNEMIX RAM
ModelPart#: MR23400-628K2-SM-SYS-5019P-M
Part NumberPart#: MR23400-628K2-SM-SYS-5019P-M
Capacity32GB (2 x 16GB)
SpeedDDR4 2933 (PC4 23400)
CAS Latency21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Questions about this item

Does the 2Rx8 dual-rank layout limit how many modules I can install per channel at full 2933 MHz?

Each 16 GB module uses a 2Rx8 organisation. Most server platforms cap dual-rank DIMMs to one per channel when running at the rated 2933 MT/s.

What thermal or power headroom should I plan for when the kit runs continuously at 1.2 V?

The modules operate at the standard DDR4 1.2 V with no extra voltage headroom required. Registered buffering adds negligible power draw, so typical server airflow is sufficient.

Must my motherboard have registered ECC RDIMM slots to use this kit?

Yes. The 288-pin RDIMMs need a server-class board that supports registered ECC DDR4. Consumer desktop boards will not accept them.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.