We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 UDIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM 32GB (2 x 16GB) DDR5 5600MHz 1Rx8 1.1V Non-ECC UDIMM server RAM

SKU CH-FNMJ-E9CQD

A 32 GB DDR5 kit with two 16 GB UDIMMs running at 5600 MHz, CL46 and 1.1 V for non-ECC desktop or server boards

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency46
  • Voltage1.1V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 32 GB kit (2 × 16 GB) gives ample capacity for multitasking
  • DDR5 5600 MHz speed delivers fast data throughput
  • CAS latency 46 keeps response times low
  • 1 V operation reduces power draw and heat
  • 1Rx8 single-rank layout supports broad motherboard compatibility

Capacity and configuration

This kit provides 32GB of DDR5 memory in two 16GB modules rated at 5600MHz with a CAS latency of 46. It is built for desktop systems that accept 288-pin UDIMM modules operating at 1.1V. The 1Rx8 organisation suits mainstream workloads and general server duties.

Practical limits of DDR5 5600

The JEDEC standard for this speed caps transfer rates at 5600 MT/s and does not define higher official bins. Real-world throughput depends on the memory controller in the processor and on motherboard trace layout. Four-module populations often force the controller to run below the rated frequency.

Installation notes

Align the single key notch on each 288-pin module with the slot and press until the retention clips click. Systems that require registered or ECC memory will not boot with these unbuffered non-ECC sticks. Mixed-rank or mixed-voltage configurations can prevent the kit from reaching its rated speed.

Highlights

  • 32 GB kit (2 × 16 GB) gives ample capacity for multitasking
  • DDR5 5600 MHz speed delivers fast data throughput
  • CAS latency 46 keeps response times low
  • 1 V operation reduces power draw and heat
  • 1Rx8 single-rank layout supports broad motherboard compatibility

Specifications

BrandNEMIX RAM
ModelPart#: MD44800-618K2-SM-AS-1015A-MT-01-G2
Part NumberPart#: MD44800-618K2-SM-AS-1015A-MT-01-G2
Capacity32GB (2 x 16GB)
SpeedDDR5 5600 (PC5 44800)
CAS Latency46
Voltage1.1V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Questions about this item

Should I pick the 2×16 GB kit or a single 32 GB module?

The 2×16 GB kit fills two slots and enables dual-channel operation, while a single 32 GB module would run in single-channel mode.

What does the 5600 MHz speed mean once installed in my system?

The modules run at 5600 MT/s with CL46 latency at 1.1 V, delivering the rated DDR5 5600 performance when the platform supports that data rate.

Is this DDR5 kit compatible with the standard 288-pin UDIMM interface?

Yes, each module uses the 288-pin UDIMM form factor and is unbuffered non-ECC, matching the desktop DDR5 slot specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.