We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM sticks, bare chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 1.1V ECC RDIMM Dell R6625

SKU CH-32HF-S36NQ

32 GB DDR5 ECC registered kit, two 16 GB modules at 4800 MT/s CL40 1.1 V, validated for Dell PowerEdge R6625

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Capacity 32GB (2 x 16GB)

Show 7 more configurations

Struck-through versions exist but are not stocked here.

Rank 1Rx8

  • 1Rx8
  • 2Rx4
  • 2Rx8
  • 4Rx4

Struck-through versions exist but are not stocked here.

  • ECC protection safeguards data integrity in critical workloads
  • Registered DDR5 4800 speed delivers high throughput for server tasks
  • 1V operation reduces power draw across 32GB capacity
  • 1Rx8 dual-rank 288-pin modules fit Dell PowerEdge R6625
  • Major OEM Samsung Micron Hynix chips ensure reliable performance

Server Memory Kit for Dell PowerEdge R6625

This 32 GB kit contains two 16 GB DDR5 4800 RDIMM modules built for the Dell PowerEdge R6625 rack server. Registered ECC operation protects data integrity in mission-critical workloads. The 1.10 V modules run at CL40 latency and use a 288-pin form factor with 1Rx8 organization.

Sustained Load Behaviour

ECC correction and registered buffering keep the memory subsystem stable during continuous enterprise workloads. Major OEM DRAM from Samsung, Micron or Hynix is stress-tested under load before shipment. The modules have no heat spreader, so airflow in the server chassis manages thermals during extended operation.

Pre-Installation Checks

Verify that the Dell PowerEdge R6625 memory slots accept 288-pin DDR5 RDIMM modules and support 1.10 V operation. Confirm the system BIOS is current enough to recognise 16 GB registered ECC DIMMs at 4800 MT/s. Ensure the chassis provides adequate airflow across the bare modules for thermal management.

Highlights

  • ECC protection safeguards data integrity in critical workloads
  • Registered DDR5 4800 speed delivers high throughput for server tasks
  • 1V operation reduces power draw across 32GB capacity
  • 1Rx8 dual-rank 288-pin modules fit Dell PowerEdge R6625
  • Major OEM Samsung Micron Hynix chips ensure reliable performance

Specifications

BrandNEMIX RAM
SeriesDell Series Server Memory
ModelDell Compatible DDR5 ECC Registered RDIMM
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Motherboard Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 1.10 V DDR5 kit draw noticeably more power under continuous load than lower-voltage modules?

The kit operates at the standard DDR5 1.10 V, so its power draw matches the JEDEC baseline for 4800 MT/s registered DIMMs.

What motherboard slot and firmware support are required for these 288-pin RDIMMs to function?

A DDR5-compatible server motherboard with 288-pin RDIMM slots and BIOS support for 1Rx8 ECC registered modules is needed.

Can the 1Rx8 registered DIMMs share memory channels with existing DDR5 RDIMMs of different rank or speed?

Mixing ranks or speeds on the same channel is not recommended; the system will clock all modules to the slowest common settings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.