We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 1Rx8 SODIMM memory upgrade

SKU CH-9J5X-H9XTP

A 32 GB DDR5 SODIMM kit running at 4800 MT/s with CL40 latency and 1.1 V operation, built for the SuperMicro X13SAV-D5LVDS embedded board

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB total capacity from two 16 GB modules
  • DDR5 4800 MT/s speed for responsive system performance
  • CL40 CAS latency at 1.1 V operating voltage
  • 262-pin SODIMM form factor fits compatible laptops and embedded boards
  • Validated for Supermicro X13SAV-D5LVDS Mini-ITX motherboard

32GB DDR5 4800 SODIMM kit

This NEMIX RAM kit provides 32 GB of DDR5 memory in a matched pair of 16 GB modules. Each stick is a 262-pin SODIMM rated for 4800 MT/s at CL40 latency and operates at 1.1 V. The modules are unbuffered, non-ECC and use a 1Rx8 organisation built with major OEM DRAM chips.

Suits the Supermicro X13SAV-D5LVDS motherboard

The kit is validated for the Supermicro X13SAV-D5LVDS Mini-ITX embedded board, so builders upgrading that specific platform can install it with confidence. Systems that require ECC memory, registered DIMMs, a different pin layout or a voltage other than 1.1 V cannot use these modules.

262-pin DDR5 SODIMM form factor

The 262-pin DDR5 SODIMM interface is the single specification that decides fitment; only boards with DDR5 SODIMM slots accepting 1.1 V unbuffered non-ECC memory will recognise the kit.

Highlights

  • 32 GB total capacity from two 16 GB modules
  • DDR5 4800 MT/s speed for responsive system performance
  • CL40 CAS latency at 1.1 V operating voltage
  • 262-pin SODIMM form factor fits compatible laptops and embedded boards
  • Validated for Supermicro X13SAV-D5LVDS Mini-ITX motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2 x 16GB) DDR5 4800MHz PC5-38400 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT

Questions about this item

Should I choose the 32GB kit or a single 16GB module?

The 32GB kit provides two matched 16GB modules for dual-channel operation, which doubles memory bandwidth compared to a single stick.

What does the DDR5 4800 speed mean for my SuperMicro X13SAV-D5LVDS system?

The modules run at 4800 MT/s with CL40 latency at 1.1V, delivering the standard DDR5 base data rate supported by the motherboard's memory controller.

Will the 262-pin SODIMM interface limit performance on this embedded Mini-ITX board?

The 262-pin DDR5 SODIMM form factor is the standard laptop interface; it carries the full 4800 MT/s signal without bottleneck on the X13SAV-D5LVDS.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.