NEMIX RAM 16GB DDR5 4800 ECC RDIMM 1Rx8 server RAM
- 16GB
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 32 GB kit of two 16 GB DDR5 4800 CL40 ECC registered DIMMs at 1.1 V for servers
Capacity 32GB (2 x 16GB)
This NEMIX RAM kit provides 32 GB of registered DDR5 server memory in a matched pair of 16 GB modules. It runs at 4800 MT/s with CL40 latency at 1.10 V. The modules use 288-pin RDIMM form factor and include on-die ECC for data integrity in enterprise workloads. Each module is single-rank 1Rx8 using major OEM DRAM chips.
The kit suits administrators upgrading or populating DDR5-capable server and workstation boards that require registered ECC DIMMs. It is not for desktop boards that accept only unbuffered non-ECC UDIMMs, nor for systems limited to earlier DDR generations or lower maximum memory speeds. Buyers needing higher frequencies, lower latencies, or larger per-module capacities should evaluate other configurations.
The decisive specification is the DDR5 4800 (PC5-38400) registered ECC rating at CL40 and 1.10 V. The motherboard memory controller and BIOS must support this exact speed and registered protocol for the kit to operate as specified. Verify platform compatibility before purchase.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 ECC Registered Server Memory Motherboard Compatible |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit uses standard 288-pin DDR5 RDIMM form factor. Verify your motherboard supports DDR5 registered ECC memory and has available RDIMM slots before installation.
Power down, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click. The commonly missed step is confirming the BIOS recognises the full 32GB capacity and ECC function after boot.
No scheduled maintenance is required for the memory modules themselves. Keep server air filters clean to maintain airflow. If a module fails, replace it with an identical 16GB DDR5 4800 CL40 1Rx8 1.1V ECC RDIMM to preserve matched pair operation.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?