BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214.99
0.00278632BTC
In stock
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V 288-Pin UDIMM for ASRock Rack W880D4U-2L2T
32GB DDR5 5600 CL46 1.1V 288-pin UDIMM kit validated for ASRock Rack W880D4U-2L2T
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB dual-channel kit expands system memory capacity
- DDR5 5600 MT/s speed raises data throughput for demanding workloads
- CL46 CAS latency and 1.1 V operation balance responsiveness with efficiency
- 288-pin UDIMM form factor fits ASRock Rack W880D4U-2L2T motherboard
- Non-ECC unbuffered design suits desktop and workstation platforms
What this kit does
This 32 GB kit contains two 16 GB DDR5 modules rated at 5600 MT/s with CL46 latency and a 1.10 V operating voltage. It is built as a 288-pin UDIMM with 1Rx8 organisation and no heat spreader, intended for the ASRock Rack W880D4U-2L2T motherboard.
Verify before ordering
Confirm that your ASRock Rack W880D4U-2L2T board accepts non-ECC unbuffered DDR5 UDIMMs and has two free 288-pin slots. The memory controller must support 5600 MT/s operation at 1.10 V; consult the board manual for the exact population rules and any BIOS version requirements.
Thermals noise and power
Running at the standard 1.10 V keeps power draw low and heat output modest for a DDR5 UDIMM. With no heat spreader fitted, airflow across the modules is the primary cooling path; ensure the chassis provides adequate air movement over the DIMM area.
Highlights
- 32 GB dual-channel kit expands system memory capacity
- DDR5 5600 MT/s speed raises data throughput for demanding workloads
- CL46 CAS latency and 1.1 V operation balance responsiveness with efficiency
- 288-pin UDIMM form factor fits ASRock Rack W880D4U-2L2T motherboard
- Non-ECC unbuffered design suits desktop and workstation platforms
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Questions about this item
What comes in the box and do I need anything else to install it?
The box contains two 16 GB DDR5 UDIMM modules for a total of 32 GB. No extra parts are required for installation.
How do I decide between the available capacities for this kit?
This kit is a fixed 32 GB set of two 16 GB modules. Choose it when your ASRock Rack W880D4U-2L2T needs 32 GB in a dual-channel pair.
What does the 5600 MT/s rating mean once the memory is running in the ASRock Rack W880D4U-2L2T?
The modules will operate at DDR5 5600 with CL46 latency at 1.1 V, delivering the rated PC5-44800 bandwidth on this motherboard.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
