We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 ECC UDIMM modules, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 ECC UDIMM CL46 1.1V Supermicro X13SAW-F

SKU CH-72P3-45QF9

A 32 GB DDR5 ECC UDIMM kit running at 5600 MT/s with CL46 latency and 1.1 V for the Supermicro X13SAW-F motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

  • 32 GB dual-channel capacity with two 16 GB modules
  • DDR5 5600 speed rated at PC5-44800 for high bandwidth
  • ECC protection detects and corrects single-bit errors automatically
  • Low 1.10 V operation reduces power draw and heat
  • Verified 288-pin UDIMM fitment for Supermicro X13SAW-F motherboard

32 GB DDR5-5600 ECC kit for Supermicro X13SAW-F

This NEMIX RAM kit delivers 32 GB as two 16 GB DDR5-5600 ECC UDIMMs built to the exact PC5-44800 CL46 1.1 V 1Rx8 specification the Supermicro X13SAW-F motherboard expects for full-speed recognition.

Who benefits and who should look elsewhere

The kit suits administrators upgrading that specific Supermicro board with validated unbuffered ECC modules that correct single-bit errors on the fly; builders needing RDIMM, SODIMM, non-ECC or any other DDR generation cannot use these modules.

Deciding spec: DDR5-5600 288-pin unbuffered ECC

Only systems that require 288-pin DDR5 unbuffered ECC UDIMMs at 5600 MT/s with CL46 timing and 1.1 V operation will accept this kit; any other form factor, voltage or speed will not work.

Highlights

  • 32 GB dual-channel capacity with two 16 GB modules
  • DDR5 5600 speed rated at PC5-44800 for high bandwidth
  • ECC protection detects and corrects single-bit errors automatically
  • Low 1.10 V operation reduces power draw and heat
  • Verified 288-pin UDIMM fitment for Supermicro X13SAW-F motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What motherboard must I already have for this 32 GB DDR5 5600 ECC UDIMM kit to work?

It is validated for the Supermicro X13SAW-F motherboard that accepts 288-pin DDR5 5600 ECC UDIMM modules.

How does this 1.1 V DDR5 5600 kit behave if I keep older DDR5 modules in the same system?

All installed DIMMs will run at the speed, voltage and timing of the slowest module, so mixing different DDR5 kits can lower overall performance.

How can I verify the kit is running at its rated CL46 5600 MT/s after installation?

Check the memory speed and latency reported in the BIOS or a tool such as CPU-Z to confirm 5600 MT/s and CL46 timings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.