We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit-board SODIMM sticks, no heat spreader, gold edge connectors, 262 pins each

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600MHz CL46 ECC SODIMM memory upgrade

SKU CH-8HTP-RCG95

A 32GB kit of two 16GB DDR5 ECC SODIMM modules running at 5600MHz with CL46 latency for Supermicro X14SAV-F systems

  • Capacity32GB (2 x 16GB)
  • Type262-Pin DDR5 ECC SODIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

  • 32 GB capacity from a matched 2 x 16 GB kit
  • DDR5 5600 MHz speed rated at PC5-44800
  • ECC error correction prevents silent data corruption
  • 1 V low voltage and CL46 timing match controller expectations
  • 262-pin unbuffered SODIMM form factor fits the Supermicro X14SAV-F motherboard

Exact-fit DDR5 ECC SODIMM kit

This 32 GB kit supplies two 16 GB DDR5 5600 ECC unbuffered SODIMM modules built to the 262-pin form factor. It targets Supermicro X14SAV-F owners who need validated, error-correcting memory that the platform recognises at its rated speed without manual tuning.

Sustained-load behaviour

ECC circuitry detects and corrects single-bit errors continuously, preventing silent data corruption during long compute runs or always-on services. The 1.10 V operating voltage and CL46 timing remain stable across extended sessions because the modules are unbuffered and spec-matched to the board's memory controller.

Deciding specification

The kit is qualified only for the Supermicro X14SAV-F motherboard running DDR5 5600 ECC; other platforms, form factors or non-ECC configurations are not supported. Buyers with different motherboards or a requirement for registered DIMMs must select a different part.

Highlights

  • 32 GB capacity from a matched 2 x 16 GB kit
  • DDR5 5600 MHz speed rated at PC5-44800
  • ECC error correction prevents silent data corruption
  • 1 V low voltage and CL46 timing match controller expectations
  • 262-pin unbuffered SODIMM form factor fits the Supermicro X14SAV-F motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered SODIMM Memory
Part NumberMSE44800-618K2
Capacity32GB (2 x 16GB)
Type262-Pin DDR5 ECC SODIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 262-PIN ECC SODIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the 1.10 V DDR5 kit draw during continuous all-day operation?

Each module runs at 1.10 V, the standard DDR5 operating voltage, so sustained power draw stays within normal DDR5 limits for 1Rx8 SODIMMs.

What must my motherboard provide for these 262-pin ECC SODIMMs to function?

A DDR5 SODIMM slot that supports unbuffered ECC memory at 5600 MHz and accepts 1Rx8 modules at 1.10 V.

Will the CL46 timing work alongside older DDR5 modules I keep in the other slots?

The memory controller will run all installed modules at the slowest common timing; mixing CL46 sticks with different-latency DDR5 is possible but may lower overall speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.