SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00495769BTC
In stock
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600MHz CL46 UDIMM memory upgrade
A 32 GB DDR5 kit of two 16 GB UDIMM modules running at 5600 MHz with CL46 latency and 1.1 V operation, built for Dell Pro Max Micro desktops
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB kit expands system memory for demanding workloads
- Dual 16 GB modules enable dual-channel bandwidth
- DDR5 5600 MT/s delivers high data-transfer rates
- Low 1.1 V operation reduces power draw
- 288-pin UDIMM fits Dell Pro Max Micro Desktop
System-Specific DDR5 Memory Kit
This NEMIX RAM kit supplies 32 GB of DDR5 memory in two 16 GB UDIMM modules. It is built for the Dell Pro Max Micro Desktop and suits owners of that system who need a straightforward capacity increase.
Straightforward DIMM Installation
The unbuffered, non-ECC design fits standard 288-pin DDR5 slots and runs at the stock 1.10 V without manual tuning. Problems usually arise only when the motherboard firmware has not been updated to recognise the 5600 MT/s speed or the 1Rx8 rank configuration.
5600 MT/s Speed Rating
The modules operate at DDR5 5600 (PC5-44800) with a CAS latency of CL46. Systems that cannot negotiate this data rate will fall back to a lower JEDEC speed, so the rated 5600 MT/s is the single specification that determines whether the kit delivers its full performance.
Highlights
- 32 GB kit expands system memory for demanding workloads
- Dual 16 GB modules enable dual-channel bandwidth
- DDR5 5600 MT/s delivers high data-transfer rates
- Low 1.1 V operation reduces power draw
- 288-pin UDIMM fits Dell Pro Max Micro Desktop
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Questions about this item
How can I verify the memory is running at 5600MHz with CL46 after installation?
Enter the system BIOS or use a tool such as CPU-Z to confirm the modules report DDR5-5600 and a CAS latency of 46 at 1.10V.
What exactly is included in the package and is anything else required?
The kit contains two 16GB 288-pin DDR5 UDIMM modules; no heat spreaders or extra cables are supplied and nothing else is needed for installation.
Should I choose the 32GB kit or a different capacity for my Dell Pro Max Micro Desktop?
This 32GB (2 x 16GB) kit matches the supported DDR5 5600 PC5-44800 specification for that system; select it when 32GB total capacity meets your workload.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
