SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00496945BTC
In stock
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H14SSL-NT memory upgrade
32 GB dual-channel DDR5-6400 ECC registered DIMM kit with CL52 timing and 1.1 V operation, validated for the Supermicro H14SSL-NT motherboard
- Capacity32GB (2 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-fit 32 GB kit runs at DDR5 6400 CL52 1.10 V
- Registered ECC design prevents silent data corruption under load
- 288-pin RDIMM form factor matches Supermicro H14SSL-NT slots
- 1Rx8 organisation lets the controller address full capacity
- Lifetime replacement warranty with free US technical support
Exact-match DDR5 RDIMM kit for Supermicro H14SSL-NT
This 32GB kit consists of two 16GB DDR5 6400 Registered ECC modules built to the precise rank, voltage and timing the Supermicro H14SSL-NT memory controller expects. It installs as a matched pair so the server recognises the full capacity at rated speed without manual configuration.
32GB capacity with single-rank headroom
Each 16GB module uses a 1Rx8 organisation, allowing all populated slots to run at the full 6400 MT/s data rate while ECC corrects single-bit errors on the fly. The registered buffer offloads the memory controller, so stability is maintained when every approved slot is filled to the board's maximum supported capacity.
Low-voltage operation reduces thermal load
The modules operate at 1.1V with no heat spreader, relying on the server's directed airflow to keep temperatures in check. Registered buffering and ECC add negligible latency overhead while preventing silent data corruption, so the kit draws minimal power and runs quietly in normal multi-threaded workloads.
Highlights
- Exact-fit 32 GB kit runs at DDR5 6400 CL52 1.10 V
- Registered ECC design prevents silent data corruption under load
- 288-pin RDIMM form factor matches Supermicro H14SSL-NT slots
- 1Rx8 organisation lets the controller address full capacity
- Lifetime replacement warranty with free US technical support
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 32GB 2X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Will the 1Rx8 registered DDR5 DIMMs work in the Supermicro H14SSL-NT alongside any older RDIMMs I keep?
The kit is spec-matched to the H14SSL-NT memory population rules at DDR5 6400 CL52 1.1V; mixing with different rank, voltage or speed DIMMs is not supported by the board.
How can I verify the ECC RDIMM kit is running at 6400 MT/s with CL52 after installation?
Enter the system BIOS or UEFI and confirm the memory speed reads 6400 MT/s, CAS latency 52, voltage 1.1 V and that ECC is shown as active for all 32 GB.
What comes in the box and do I need extra parts for the H14SSL-NT?
The box contains two 16 GB 288-pin DDR5 RDIMMs; no additional components are required for installation on the H14SSL-NT motherboard.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
