We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 32GB (4x16GB) DDR4 2133MHz CL15 2Rx8 1.2V 288-Pin UDIMM ASUS Compatible memory upgrade

SKU CH-KTTN-3J1CY

A 32 GB DDR4 kit of four 16 GB UDIMM modules running at 2133 MHz CL15 for ASUS motherboards

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB total capacity from four 16 GB modules
  • DDR4 2133 MHz speed with CL15 latency
  • 2 V low-voltage operation for efficiency
  • 288-pin UDIMM form factor fits standard desktop slots
  • Validated for ASUS motherboard compatibility

32GB DDR4 2133MHz Kit for ASUS

This 32GB kit contains four 16GB DDR4 UDIMM modules rated at 2133MHz with CL15 latency. Each stick runs at 1.2V and uses a 2Rx8 organisation without a heat spreader. The memory is validated for compatibility with ASUS motherboards.

Suits ASUS desktop upgrades.

Builders expanding an ASUS desktop to 32GB with standard unbuffered DDR4 will find this kit a direct fit. Systems that require ECC error correction or registered modules cannot use these sticks. Buyers who want more storage capacity must select a different kit.

CL15 latency at 2133MHz decides fit

The CAS latency of CL15 at the rated 2133MHz speed is the key timing specification that determines whether this kit matches the motherboard's supported memory profile. Verify that the board accepts CL15 at this frequency before purchase.

Highlights

  • 32 GB total capacity from four 16 GB modules
  • DDR4 2133 MHz speed with CL15 latency
  • 2 V low-voltage operation for efficiency
  • 288-pin UDIMM form factor fits standard desktop slots
  • Validated for ASUS motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesASUS Gaming Motherboard Compatible Series Memory
ModelASUS DDR4 2133MHZ Non-ECC Unbuffered UDIMM
Part NumberMD17000-628K4
Capacity64GB (4 x 16GB)
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASUS
CAS LatencyCL15
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (4X16GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

What maximum speed does the DDR4-2133 interface deliver with this kit?

The modules run at 2133 MT/s (PC4-17000) with CL15 latency at 1.2 V.

What physical slot and clearance does the 288-pin UDIMM need?

Each 16 GB stick uses a standard 288-pin DDR4 UDIMM slot and has no heat spreader, so it fits low-profile coolers.

How do I install the four modules and which slot order avoids the common mistake?

Power off, open the case, align each notch with the key in the motherboard slots, press firmly until the latches click, then boot; the error is populating slots randomly instead of following the board's recommended channel order.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.