We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 SODIMM modules with gold contacts and black chips

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2400MHz CL17 ECC SODIMM 260-pin 1.2V

SKU CH-4872-A37XA

A 32 GB DDR4 ECC SODIMM kit running at 2400 MHz CL17 1.20 V for laptops, AIOs, SFF PCs and NAS devices

  • Capacity32GB (4 x 8GB)
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC protection ensures data integrity for critical workloads
  • 32 GB kit (4 × 8 GB) expands capacity for multitasking
  • DDR4 2400 MHz CL17 delivers responsive system performance
  • 2 V operation reduces power draw and heat
  • 260-pin unbuffered SODIMM fits compatible laptops, AIO and NAS devices

32GB DDR4 ECC SODIMM kit

This kit provides 32GB of DDR4 memory in four 8GB modules running at 2400MHz with CL17 latency. It is built for laptops, all-in-one PCs, small-form-factor systems and NAS devices that require ECC unbuffered SODIMMs. The 1.2V operating voltage matches standard DDR4 power envelopes.

260-pin unbuffered ECC modules

Each module uses a 260-pin SO-DIMM edge connector without a heat spreader, keeping the profile low for tight chassis. ECC capability adds single-bit error correction for data integrity in always-on workloads. The unbuffered design means direct connection to the memory controller without registered delay.

Replaces non-ECC or lower-capacity SODIMMs

The jump is worth it when your platform supports ECC and you need the reliability of error-correcting memory at 2400MHz. Systems limited to slower DDR4 speeds or lacking ECC support cannot use these features. Buyers who need higher frequencies or registered DIMMs should look elsewhere.

Highlights

  • ECC protection ensures data integrity for critical workloads
  • 32 GB kit (4 × 8 GB) expands capacity for multitasking
  • DDR4 2400 MHz CL17 delivers responsive system performance
  • 2 V operation reduces power draw and heat
  • 260-pin unbuffered SODIMM fits compatible laptops, AIO and NAS devices

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Series 260-Pin ECC Unbuffered SODIMM Memory
ModelDDR4 ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory
Part NumberMSE19200-828K4
Capacity32GB (4 x 8GB)
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesDDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the DDR4-2400 PC4-19200 interface cap real-world bandwidth at 2400 MT/s per module?

Yes, each 8 GB module runs at DDR4-2400 which equals 2400 MT/s; the PC4-19200 label reflects that same peak transfer rate.

Will these 260-pin SODIMMs fit a standard laptop memory slot?

The kit uses the 260-pin DDR4 SO-DIMM form factor, so it fits any laptop, AIO, SFF or NAS bay that accepts 260-pin DDR4 memory.

What is the correct way to install the four sticks, and what step do people often miss?

Power off, open the chassis, align each module's notch with the slot key, press firmly until the side clips click, then verify all four are seated before closing the case.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.