We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Single green 288-pin DDR5 UDIMM module, bare black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 CL46 1.1V 2Rx8 UDIMM memory upgrade for Supermicro BH4SRG

SKU CH-N9RJ-TQ435

A 32GB DDR5 5600 CL46 1.1V 2Rx8 UDIMM module built for Supermicro BH4SRG motherboards

  • Capacity32GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB capacity expands system memory for demanding workloads
  • DDR5 5600 speed delivers high data throughput
  • CL46 latency supports responsive operation
  • 1 V voltage reduces power draw
  • 2Rx8 288-pin UDIMM fits Supermicro BH4SRG motherboard

Targeted DDR5 upgrade for Supermicro BH4SRG

This 32GB DDR5 module is built specifically for the Supermicro BH4SRG motherboard. It delivers a single 32GB stick of non-ECC unbuffered memory that installs directly into a standard 288-pin UDIMM slot without registration or error correction.

DDR5 5600 speed and platform limits

The module runs at 5600 MT/s with a CL46 latency at 1.1V, matching the PC5-44800 standard. System memory speed will ultimately be governed by the CPU memory controller and the motherboard firmware, so the rated transfer rate may not be reached on every configuration.

32GB density in one slot

The 2Rx8 organization packs the full 32GB capacity into a single DIMM, leaving remaining slots free for future expansion. Buyers who need ECC protection or registered buffering for server workloads cannot use this unbuffered non-ECC part.

Highlights

  • 32 GB capacity expands system memory for demanding workloads
  • DDR5 5600 speed delivers high data throughput
  • CL46 latency supports responsive operation
  • 1 V voltage reduces power draw
  • 2Rx8 288-pin UDIMM fits Supermicro BH4SRG motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K1
Capacity32GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM

Questions about this item

Is the 32 GB single-module kit the right choice or should I look for a dual-channel kit for the Supermicro BH4SRG?

The kit contains one 32 GB module; adding a second identical module later will enable dual-channel operation on the Supermicro BH4SRG.

Will the DDR5 5600 rating run at 5600 MT/s on the Supermicro BH4SRG or does the board limit it?

The module is rated for DDR5 5600; the actual speed will be set by the Supermicro BH4SRG memory controller and BIOS.

Does the 288-pin DDR5 UDIMM fit the Supermicro BH4SRG DIMM slots and what does the PC5-44800 label mean?

Yes, the 288-pin DDR5 UDIMM matches the board slots; PC5-44800 denotes the peak transfer rate of 44 800 MB/s at 5600 MT/s.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.