SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00497165BTC
In stock
NEMIX RAM
NEMIX RAM 32GB DDR5 5600 ECC RDIMM 2Rx8 CL46 1.1V Supermicro H14SST-G memory upgrade
32 GB DDR5-5600 registered ECC RDIMM, CL46 at 1.1 V, 2Rx8, verified for Supermicro H14SST-G
- Capacity32GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- Exact 32 GB DDR5-5600 upgrade for Supermicro H14SST-G
- Registered ECC RDIMM corrects single-bit errors automatically
- 2Rx8 organisation keeps every slot populated at full speed
- 10 V operation matches the board's memory controller spec
- 288-pin DDR5 form factor fits the required DIMM sockets
Exact-match DDR5-5600 upgrade for Supermicro
This 32 GB DDR5 RDIMM runs at 5600 MT/s with CL46 timing and 1.10 V. Registered ECC architecture and a 2Rx8 organisation give the memory controller the precise electrical load it expects. The module installs in any of the board's 288-pin slots and is recognised at full capacity without manual tuning.
Suited for administrators populating Supermicro
The registered design and on-die ECC protect production workloads from single-bit errors and allow every slot to be filled. Builders who need unbuffered UDIMMs, SODIMM form factors, or non-ECC memory for consumer platforms should choose a different module.
Fits directly into the H14SST-G memory subsystem
Each stick occupies one 288-pin DDR5 RDIMM slot and draws 1.10 V from the server's regulated supply. Registered buffering frees the onboard memory controller from excessive electrical load, leaving more headroom for fully populated configurations. Consult the motherboard manual for approved population order before installation.
Highlights
- Exact 32 GB DDR5-5600 upgrade for Supermicro H14SST-G
- Registered ECC RDIMM corrects single-bit errors automatically
- 2Rx8 organisation keeps every slot populated at full speed
- 10 V operation matches the board's memory controller spec
- 288-pin DDR5 form factor fits the required DIMM sockets
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-328K1 |
| Capacity | 32GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Do I need a Supermicro H14SST-G motherboard with DDR5 RDIMM slots to use this 32GB 5600 CL46 module?
Yes, this is a 288-pin DDR5 RDIMM built for the H14SST-G; the board must support DDR5 Registered ECC memory at 1.1 V for the module to be recognised and run at its rated 5600 speed.
Can I add this 2Rx8 CL46 1.1V RDIMM alongside other registered ECC modules already installed in my H14SST-G?
The H14SST-G requires matching rank, voltage and timing across populated slots; this 2Rx8 CL46 1.1V stick should be paired with identical spec modules and installed in the population order shown in the board manual.
How do I confirm the system sees the full 32 GB at DDR5-5600 CL46 after installation?
Enter BIOS or use a hardware tool such as dmidecode; verify the module reports 32 GB capacity, 5600 MT/s speed, CL46 latency, 1.1 V voltage and ECC Registered status without errors.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
