We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 6400 CL52 1.1V 2Rx8 ECC RDIMM H14DST-F memory upgrade

SKU CH-WMKK-CK7K4

32 GB DDR5 6400 registered ECC RDIMM at 1.1 V CL52 for Supermicro H14DST-F

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 32 GB capacity expands server memory for larger workloads
  • DDR5 6400 speed with CL52 timing delivers rated performance
  • Registered ECC design corrects single-bit errors for data integrity
  • 10 V operation matches platform voltage requirements
  • 288-pin RDIMM form factor fits Supermicro H14DST-F motherboard

Exact DDR5 ECC RDIMM for Supermicro H14DST-F

This 32 GB DDR5 module is built as a registered ECC RDIMM for servers that require error-correcting memory. It targets administrators upgrading or populating the Supermicro H14DST-F motherboard with validated components.

2Rx8 CL52 at 1.1 V DDR5-6400

The single specification that decides fitment is the 2Rx8 registered ECC configuration running at CL52 with 1.1 V on DDR5-6400 (PC5-51200). The memory controller expects this exact rank, voltage and timing combination to recognise full capacity and operate at rated speed.

Keyed 288-pin RDIMM installation

The 288-pin RDIMM form factor keys into the board's registered DIMM slots only; UDIMM or SODIMM modules will not seat. Consult the motherboard manual for supported population order and maximum capacity per channel before installing.

Highlights

  • 32 GB capacity expands server memory for larger workloads
  • DDR5 6400 speed with CL52 timing delivers rated performance
  • Registered ECC design corrects single-bit errors for data integrity
  • 10 V operation matches platform voltage requirements
  • 288-pin RDIMM form factor fits Supermicro H14DST-F motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

What does the 6400 speed rating mean when the module is installed in the Supermicro H14DST-F?

The module runs at DDR5-6400 (PC5-51200) data rate with CL52 latency at 1.1 V, matching the board's native memory controller specification for full-capacity operation.

How does the 288-pin RDIMM interface affect usable capacity on this motherboard?

The registered 288-pin RDIMM form factor is required by the H14DST-F; it allows every slot to be populated at the rated 32 GB per module without signal degradation.

What physical clearance does the 32 GB module need inside the server chassis?

The module uses a standard 288-pin RDIMM height with no heat spreader, so it fits the regular DIMM slots on the H14DST-F without extra clearance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.