SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00500325BTC
In stock
NEMIX RAM
NEMIX RAM 384GB 12x32GB DDR5 5600 CL46 1.1V ECC RDIMM Supermicro H13DSG-O-CPU
384 GB server memory kit with twelve 32 GB DDR5-5600 registered ECC RDIMMs at CL46 and 1.1 V for the Supermicro H13DSG-O-CPU motherboard
- Capacity384GB (12 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 384 GB total capacity from twelve 32 GB modules for high-density server workloads
- DDR5 5600 MT/s speed rated at CL46 latency for responsive data throughput
- 1 V operating voltage reduces power draw across fully populated slots
- Registered ECC RDIMM design corrects single-bit errors and stabilises every channel
- 288-pin form factor verified for Supermicro H13DSG-O-CPU motherboard compatibility
384GB DDR5-5600 RDIMM kit for Supermicro
This 12-module kit delivers 384GB of DDR5-5600 registered ECC memory built for the Supermicro H13DSG-O-CPU motherboard. Each 32GB DIMM operates at 1.1V with CL46 latency and a 2Rx8 organisation. The registered design allows full population of every slot while maintaining rated speed.
DDR5-5600 registered ECC limits with full population
DDR5-5600 (PC5-44800) sets the maximum data rate when all twelve slots are filled on this platform. Registered buffering reduces electrical load on the memory controller so the kit runs at its rated 5600 MT/s without downclocking. ECC corrects single-bit errors in flight, preventing silent data corruption during sustained workloads.
Upgrade from smaller DDR5 RDIMM configurations
Replacing a partial kit or lower-capacity DDR5 RDIMMs with this 12×32GB set unlocks the board's maximum supported density in a single validated package. The jump is worth it when your workload demands full-slot population at the native 5600 MT/s rate with registered ECC stability.
Highlights
- 384 GB total capacity from twelve 32 GB modules for high-density server workloads
- DDR5 5600 MT/s speed rated at CL46 latency for responsive data throughput
- 1 V operating voltage reduces power draw across fully populated slots
- Registered ECC RDIMM design corrects single-bit errors and stabilises every channel
- 288-pin form factor verified for Supermicro H13DSG-O-CPU motherboard compatibility
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-328K12 |
| Capacity | 384GB (12 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 12X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Should I pick the 12-module 384GB kit or a smaller capacity for my Supermicro H13DSG-O-CPU?
The 12 x 32GB kit fills every DIMM slot on the H13DSG-O-CPU, giving the full 384GB the board supports. Choose a smaller kit only if you need to leave slots open for future expansion.
What does DDR5-5600 CL46 actually deliver inside this server?
The modules run at 5600 MT/s with 46-cycle CAS latency at 1.1 V, so the memory controller sees the rated bandwidth and timing without down-clocking when all twelve slots are populated.
How does the 288-pin RDIMM interface limit speed or capacity on this platform?
The 288-pin Registered DIMM format is the only type the H13DSG-O-CPU accepts; it enables the full 384GB across twelve slots while keeping the DDR5-5600 data rate stable under load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
