NEMIX RAM
NEMIX RAM 48GB (2x24GB) DDR5 5600 CL46 288-Pin UDIMM Memory Upgrade for ASUS ProArt Z890-CREATOR WiFi
48 GB dual-channel DDR5 kit with two 24 GB modules at 5600 MT/s CL46, 1.1 V, 288-pin unbuffered non-ECC UDIMM validated for the ASUS ProArt Z890-CREATOR WiFi motherboard
- Capacity48GB (2 x 24GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 48 GB kit expands multitasking headroom with two 24 GB modules
- DDR5 5600 speed feeds data to the CPU at PC5-44800 bandwidth
- CL46 latency keeps response tight for demanding workloads
- 1 V operation reduces power draw and heat output
- 288-pin UDIMM fits the ASUS ProArt Z890-CREATOR WiFi motherboard
Built for ASUS ProArt Z890-CREATOR WiFi
This 48GB kit contains two 24GB DDR5 UDIMM modules rated at 5600MHz PC5-44800 with CL46 latency. They run at 1.1V as non-ECC unbuffered memory using 2Rx8 organisation. The kit is validated for the ASUS ProArt Z890-CREATOR WiFi motherboard.
Suits creators upgrading that specific board
Users who need ECC error correction or registered modules should look elsewhere. Builders targeting a different motherboard or a platform that requires a different DDR generation cannot use this kit.
Simple DIMM-slot installation
Align the notch on each 288-pin module with the slot key and press until the retention clips lock. The most common issue is seating a module partially so the system fails to post; re-seat both sticks firmly to resolve it.
Highlights
- 48 GB kit expands multitasking headroom with two 24 GB modules
- DDR5 5600 speed feeds data to the CPU at PC5-44800 bandwidth
- CL46 latency keeps response tight for demanding workloads
- 1 V operation reduces power draw and heat output
- 288-pin UDIMM fits the ASUS ProArt Z890-CREATOR WiFi motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-2428K2 |
| Capacity | 48GB (2 x 24GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASUS |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 48GB (2 x 24GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Questions about this item
Do I need a motherboard with an 890-series chipset and 288-pin DDR5 slots to use this 48 GB kit?
Yes, the modules are 288-pin DDR5 UDIMMs designed for the ASUS ProArt Z890-CREATOR WiFi motherboard, so a board with DDR5 slots and an 890-series chipset is required.
Will this 48 GB DDR5 5600 kit run at 5600 MT/s if I keep my older DDR5 memory installed?
The kit is rated CL46 at 5600 MT/s; mixing with other DDR5 modules will cause the system to run all memory at the lowest common speed and loosest timings.
How can I confirm the kit is operating at 5600 MT/s with CL46 timings after installation?
Enter the UEFI or use a tool such as CPU-Z to verify the memory frequency reads 5600 MT/s and the CAS latency shows CL46 at 1.10 V.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



