We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with gold edge connectors and black memory chips in a standard DIMM form factor

NEMIX RAM

NEMIX RAM 48GB DDR5 4800 PC5-38400 2Rx8 CL40 1.1V ECC RDIMM Supermicro H13SST-GC memory upgrade

SKU CH-QNMH-8E6XQ

48GB DDR5 4800 ECC RDIMM with CL40 latency and 1.1V registered operation, validated for the Supermicro H13SST-GC motherboard

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 48GB

Show 24 more configurations
  • Exact-match 48 GB DDR5-4800 for Supermicro H13SST-GC
  • Registered ECC RDIMM prevents silent data corruption
  • 2Rx8 CL40 1.1 V runs at rated speed fully populated
  • 288-pin DDR5 form factor fits the board's slots
  • Lifetime replacement warranty with US-based technical support

Exact-fit DDR5 upgrade for Supermicro H13SST-GC

This 48GB DDR5 4800 PC5-38400 registered ECC RDIMM is built to the precise rank, voltage and timing the Supermicro H13SST-GC memory controller expects. It delivers 48GB at 1.1V with CL40 latency in a 2Rx8 configuration. The module is intended for servers and workstations that require registered memory with error correction.

Straightforward DIMM installation

The 288-pin RDIMM seats in the standard DDR5 slots on the H13SST-GC board. Because the platform uses registered memory, every slot can run fully populated at rated speed when the correct population order is followed. The most common issue is inserting modules in the wrong sequence or mixing ranks, which prevents the system from recognising the full capacity. No heat spreader is fitted, so clearance is minimal, but the motherboard manual must be consulted for the approved slot order before fitting.

Verify capacity limits

Check the Supermicro H13SST-GC manual for the maximum supported capacity per DIMM and the required population sequence for 2Rx8 registered modules. Confirm the board's qualified vendor list includes this specification and that the BIOS version in use supports the full 48GB density. Systems that only accept unbuffered UDIMMs or SODIMMs cannot use this RDIMM.

Highlights

  • Exact-match 48 GB DDR5-4800 for Supermicro H13SST-GC
  • Registered ECC RDIMM prevents silent data corruption
  • 2Rx8 CL40 1.1 V runs at rated speed fully populated
  • 288-pin DDR5 form factor fits the board's slots
  • Lifetime replacement warranty with US-based technical support

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I confirm the module runs at 4800 MT/s with CL40 after installing it in the Supermicro H13SST-GC?

Enter the BIOS or use a hardware-info utility and verify the memory speed reads 4800 MT/s and CAS latency shows CL40; the registered ECC design ensures the controller recognises the 2Rx8 rank at its rated timing.

What comes in the package and is anything else required for installation?

The box contains a single 48 GB 288-pin DDR5 RDIMM; no heat spreader or extra cables are included, and no separate components are needed beyond a compatible DIMM slot on the motherboard.

Which capacity or version should I choose for the H13SST-GC?

This part number MR38400-4828K1 is a 48 GB DDR5-4800 2Rx8 registered ECC module built to the board's exact voltage and rank requirements; select it when your configuration calls for a 48 GB registered DIMM.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.