SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00497993BTC
In stock
NEMIX RAM
NEMIX RAM 512GB 8x64GB DDR5 5600 CL46 ECC RDIMM Supermicro H13SSF memory upgrade
Eight 64 GB DDR5-5600 CL46 registered ECC RDIMMs totalling 512 GB, validated for the Supermicro H13SSF motherboard at 1.1 V
- Capacity512GB (8 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 512 GB total capacity from eight 64 GB modules
- DDR5 5600 speed with CL46 latency for rated throughput
- Registered ECC design corrects single-bit errors on the fly
- 1 V operation matches the motherboard's memory controller spec
- 288-pin RDIMM form factor fits the Supermicro H13SSF slots
Exact-match DDR5-5600 kit for Supermicro H13SSF
This 512GB kit contains eight 64GB DDR5-5600 RDIMMs built to the precise rank, voltage and timing the H13SSF memory controller expects. Registered ECC architecture offloads the controller so every slot runs fully populated at rated speed. It targets server administrators who need maximum supported capacity without manual tuning.
Capacity and headroom
Eight 2Rx4 modules deliver 512GB total, filling all available DIMM slots on the board. Registered buffering keeps electrical loading low so the full complement operates at CL46 1.10V without down-clocking. ECC corrects single-bit errors on the fly, preventing silent data corruption under sustained workloads. Buyers who need more than 512GB or non-ECC operation cannot use this kit.
What the bundle changes
The matched 8x64GB set eliminates mixed-rank instability and guarantees the population order the H13SSF firmware requires. Major OEM Samsung, Micron or Hynix DRAM ensures consistent binning across all modules. Lifetime replacement coverage and US-based technical support replace the risk of sourcing loose DIMMs from multiple lots.
Highlights
- 512 GB total capacity from eight 64 GB modules
- DDR5 5600 speed with CL46 latency for rated throughput
- Registered ECC design corrects single-bit errors on the fly
- 1 V operation matches the motherboard's memory controller spec
- 288-pin RDIMM form factor fits the Supermicro H13SSF slots
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K8 |
| Capacity | 512GB (8 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 512GB 8X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Will the 288-pin DDR5 5600 RDIMMs work in the Supermicro H13SSF alongside any existing DDR5 modules?
The kit is verified for the Supermicro H13SSF and uses the registered RDIMM form factor the board requires; follow the motherboard manual for approved population order when mixing with other DDR5 RDIMMs.
How can I confirm the 512GB kit is running at DDR5 5600 CL46 after installation?
Check the BIOS or UEFI memory information screen — it should report 5600 MT/s, CL46 timings, 1.10 V, and the full 512 GB capacity across all eight slots.
What is included in the 512GB kit and what must be sourced separately?
The box contains eight 64 GB DDR5 5600 CL46 288-pin ECC registered RDIMMs; no heat spreaders, cables, or additional hardware are included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
