SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.004997BTC
In stock
NEMIX RAM
NEMIX RAM 576GB 12x48GB DDR5 6400 CL52 1.1V 2Rx8 RDIMM ECC Supermicro H14DST-F memory upgrade
A 576 GB DDR5 registered ECC memory kit of twelve 48 GB modules running at 6400 MT/s CL52 1.1 V 2Rx8, validated for the Supermicro H14DST-F motherboard
- Capacity576GB (12 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 576 GB total capacity from twelve 48 GB modules for maximum server memory density
- DDR5 6400 speed with CL52 latency at 1.1 V for rated performance
- Registered ECC RDIMM architecture corrects single-bit errors and offloads the memory controller
- 288-pin 2Rx8 form factor matches Supermicro H14DST-F population rules exactly
- Lifetime replacement warranty with US-based technical support included
Capacity and Compatibility
This 576GB kit contains twelve 48GB DDR5 modules built for the Supermicro H14DST-F motherboard. Each stick is a 288-pin Registered ECC RDIMM that matches the board's population rules and memory-controller expectations. It is intended for administrators who need the maximum supported capacity in a single validated package.
Registered ECC Advantage
The registered architecture buffers address and command signals so the memory controller can drive all twelve slots at the rated 6400 MT/s without signal degradation. ECC corrects single-bit errors on the fly, preventing silent data corruption that can crash production workloads. This combination replaces unbuffered or non-ECC memory that cannot sustain full-capacity operation on this platform.
DDR5 Platform Limits
DDR5 on this motherboard tops out at 6400 MT/s with CL52 timing at 1.1V, so the kit cannot run faster than the CPU's integrated memory controller allows. Population order and maximum capacity per channel are fixed by the board design; exceeding those limits will prevent boot or force downclocking. Buyers who need higher frequencies or different form factors such as UDIMM or SODIMM cannot use this product.
Highlights
- 576 GB total capacity from twelve 48 GB modules for maximum server memory density
- DDR5 6400 speed with CL52 latency at 1.1 V for rated performance
- Registered ECC RDIMM architecture corrects single-bit errors and offloads the memory controller
- 288-pin 2Rx8 form factor matches Supermicro H14DST-F population rules exactly
- Lifetime replacement warranty with US-based technical support included
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K12 |
| Capacity | 576GB (12 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 12X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Will the 288-pin RDIMM modules fit the DIMM slots on the Supermicro H14DST-F motherboard?
Yes, the 288-pin Registered RDIMM form factor matches the slots this motherboard requires; it is not a UDIMM or SODIMM and is spec-matched to the board's population rules.
What is the correct installation sequence for the 12 modules in the 576GB kit?
Consult the Supermicro H14DST-F manual for the approved DIMM population order; the 12 x 48GB 2Rx8 modules must be installed in the sequence the board specifies to run at the rated 6400 speed.
Do the modules need a heat spreader or active cooling for long-term operation?
The kit ships without a heat spreader; Registered ECC DDR5 at 1.10V is designed to operate within standard server airflow, so no additional cooling is required beyond the chassis fans.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
