SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.0049963BTC
In stock
NEMIX RAM
NEMIX RAM 576GB (6x96GB) DDR5 6400 CL52 ECC RDIMM SuperMicro AS-8126GS-NB3RT
A 576GB kit of six 96GB DDR5 6400 CL52 ECC registered DIMMs built for the SuperMicro AS-8126GS-NB3RT server
- Capacity576GB (6 x 96GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 576 GB total capacity across six 96 GB modules for dense server workloads
- DDR5 6400 MT/s speed with CL52 latency supports high-throughput computing
- ECC registered design detects and corrects data errors in critical applications
- 1 V operating voltage reduces power draw per module
- Validated for SuperMicro GPU A+ Server AS-8126GS-NB3RT
Capacity & configuration
This kit provides 576 GB of DDR5 memory across six 96 GB registered DIMMs. It is built for the SuperMicro GPU A+ Server AS-8126GS-NB3RT and similar platforms that accept 288-pin DDR5 RDIMMs with ECC. The modules run at 6400 MHz with a CAS latency of 52 and a 1.1 V operating voltage.
Who this suits
Server administrators who need maximum registered ECC capacity in a validated six-module kit for the named SuperMicro system will benefit. Builders requiring unbuffered UDIMMs, non-ECC memory, lower densities or a different pin count should look elsewhere.
Build integration
Each 288-pin RDIMM occupies a standard DDR5 server slot and draws 1.1 V, leaving the platform’s memory controller to handle registration and error correction. The 2Rx4 organisation helps populate all channels without exceeding rank limits on supported boards. No heat spreaders are fitted, so airflow across the DIMM rows must be adequate.
Highlights
- 576 GB total capacity across six 96 GB modules for dense server workloads
- DDR5 6400 MT/s speed with CL52 latency supports high-throughput computing
- ECC registered design detects and corrects data errors in critical applications
- 1 V operating voltage reduces power draw per module
- Validated for SuperMicro GPU A+ Server AS-8126GS-NB3RT
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K6 |
| Capacity | 576GB (6 x 96GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB (6 x 96GB) DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Does my SuperMicro AS-8126GS-NB3RT server need a specific BIOS version to recognise the 6400 MT/s DDR5 ECC RDIMM kit?
The kit is validated for the SuperMicro GPU A+ Server AS-8126GS-NB3RT; consult the server manual for any BIOS revision required to enable DDR5 6400 operation.
Can I mix these CL52 2Rx4 modules with existing lower-capacity DDR5 RDIMMs already installed in the AS-8126GS-NB3RT?
Mixing ranks and capacities is not recommended; the server's memory controller expects matched 2Rx4 96 GB modules for optimal signal integrity at 6400 MT/s.
How do I confirm the full 576 GB kit is running at 6400 MT/s with ECC active after installation?
Check the BIOS memory information screen or OS tools such as dmidecode to verify speed shows 6400 MT/s, capacity reads 576 GB and ECC status is enabled.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
