We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR5 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM 64GB (2×32GB) DDR5-4800 ECC Registered RDIMM CL40 1.1V Supermicro H13SVW-N memory upgrade

SKU CH-VX2S-2710Q

A 64GB DDR5 ECC Registered RDIMM kit, two 32GB modules at 4800MHz CL40 1.1V, validated for the Supermicro H13SVW-N motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

Show 12 more configurations

Speed 4800MHz

  • 64 GB kit (2 × 32 GB) installs at full rated capacity
  • DDR5-4800 PC5-38400 speed runs at the board's native data rate
  • Registered ECC design corrects single-bit errors and offloads the memory controller
  • CL40 latency at 1.1 V matches the controller's exact timing profile
  • 288-pin RDIMM form factor fits the Supermicro H13SVW-N motherboard slots

64GB DDR5-4800 ECC RDIMM kit for Supermicro H13SVW-N

This 64GB kit contains two 32GB DDR5-4800 Registered ECC modules built to the exact 2Rx8, 1.1V, CL40 specification the Supermicro H13SVW-N memory controller expects. The 288-pin RDIMM form factor matches the board's DIMM slots so the system recognises the full capacity at rated speed.

Registered ECC architecture for full-population

Registered buffering offloads the memory controller, allowing every slot to run fully populated at 4800MT/s without signal degradation, while on-die ECC detects and corrects single-bit errors before they cause silent data corruption or unplanned reboots. Major-brand Samsung, Micron or Hynix DRAM underpins the enterprise-grade reliability.

Suited for H13SVW-N servers needing maximum

Ideal for administrators populating the Supermicro H13SVW-N to its supported limit with validated Registered ECC modules. Not for systems that require unbuffered UDIMMs, SODIMM form factors, non-ECC memory, or speeds and voltages outside the DDR5-4800 1.1V CL40 2Rx8 specification.

Highlights

  • 64 GB kit (2 × 32 GB) installs at full rated capacity
  • DDR5-4800 PC5-38400 speed runs at the board's native data rate
  • Registered ECC design corrects single-bit errors and offloads the memory controller
  • CL40 latency at 1.1 V matches the controller's exact timing profile
  • 288-pin RDIMM form factor fits the Supermicro H13SVW-N motherboard slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 2Rx8 DDR5-4800 CL40 RDIMMs need any firmware updates or reconfiguration if I replace a failed module later?

The kit is spec-matched to the Supermicro H13SVW-N memory controller, so a replacement module with identical DDR5-4800, 2Rx8, CL40, 1.1V registered ECC parameters will be recognised at full capacity and rated speed without firmware changes.

What limit appears first when all four channels stay fully populated at DDR5-4800 under continuous load?

The registered (buffered) architecture offloads the memory controller, allowing every slot to run fully populated at the rated 4800 MT/s; the first practical limit is the board's maximum supported capacity rather than a speed down-shift.

How much heat and power does the 64 GB kit produce when the server runs all day without a heat spreader?

Each 32 GB module operates at 1.1 V DDR5 voltage with no heat spreader; registered ECC RDIMMs of this density typically stay within standard server airflow limits, and the board's DIMM cooling zone handles the thermal load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.