We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 64GB 2x32GB DDR5 4800 CL40 1.1V 2Rx8 ECC RDIMM Kit Supermicro H13SVW-NT-OS1

SKU CH-26M7-QA66E

A 64 GB DDR5 4800 CL40 ECC RDIMM kit built for the Supermicro H13SVW-NT-OS1 motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

Show 12 more configurations
  • 64 GB total capacity from two 32 GB modules for high-density server workloads
  • DDR5 4800 speed rated at PC5-38400 delivers rated bandwidth without down-clocking
  • CL40 CAS latency at 1.1 V matches the memory controller timing for stable operation
  • Registered ECC architecture with 2Rx8 organisation corrects single-bit errors and supports full-slot population
  • 288-pin RDIMM form factor verified for Supermicro H13SVW-NT-OS1 motherboard compatibility

System-Specific DDR5 ECC Kit

This 64 GB kit contains two 32 GB DDR5-4800 registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H13SVW-NT-OS1 memory controller expects. It installs as a matched pair so the server recognises the full capacity at rated speed without manual configuration.

Thermals and Power at CL40 1.10 V

Operating at 1.10 V with CL40 latency, the modules draw minimal power and run without heat spreaders, relying on the chassis airflow the Supermicro platform already provides. Registered buffering reduces electrical load on the memory controller, keeping temperatures steady even when every slot is populated.

What the Kit Changes

The package delivers only the two 288-pin RDIMMs; no extra cables, software or cooling hardware are included. Compatibility is limited to systems that accept DDR5 registered ECC memory in a 2Rx8 organisation, so builders needing unbuffered UDIMMs or a different rank configuration must look elsewhere.

Highlights

  • 64 GB total capacity from two 32 GB modules for high-density server workloads
  • DDR5 4800 speed rated at PC5-38400 delivers rated bandwidth without down-clocking
  • CL40 CAS latency at 1.1 V matches the memory controller timing for stable operation
  • Registered ECC architecture with 2Rx8 organisation corrects single-bit errors and supports full-slot population
  • 288-pin RDIMM form factor verified for Supermicro H13SVW-NT-OS1 motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 288-pin DDR5 RDIMM modules in the Supermicro H13SVW-NT-OS1 and which population rule is often missed?

Power off the server, open the chassis, and insert each 32 GB module into the slots specified by the motherboard manual for a two-DIMM configuration; the step most often missed is following the exact slot order required for dual-channel operation.

What maintenance or replacement will the ECC RDIMM kit need over its service life?

No routine maintenance is required; if a module fails it is covered by the manufacturer's lifetime replacement warranty, and the registered ECC design helps prevent silent data corruption during operation.

What limit appears first when the 64 GB DDR5-4800 kit runs sustained workloads?

The registered buffer and ECC logic keep every slot stable at the rated 4800 MT/s speed and 1.1 V, so the first practical limit is the motherboard's maximum supported capacity rather than memory throttling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.