BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214.99
0.00278755BTC
In stock
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 1.1V UDIMM for GIGABYTE Z690I AORUS Ultra Plus LITE memory upgrade
64GB DDR5 kit with two 32GB modules at 5600MHz CL46 and 1.1V for GIGABYTE Z690I AORUS Ultra, Plus, LITE boards
- Capacity64GB (2 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB kit doubles capacity for demanding workloads
- DDR5 5600 speed delivers high data throughput
- CL46 latency supports responsive system operation
- 1 V operation reduces power draw and heat
- Validated for GIGABYTE Z690I AORUS Ultra, Plus, LITE boards
Kit composition and target platform
This kit provides 64GB of DDR5 memory in two 32GB modules built for the GIGABYTE Z690I AORUS Ultra Plus LITE Mini-ITX motherboard. It suits users who want the maximum capacity this board can accept in a dual-channel layout. Builders needing more than two slots or a different form factor should look elsewhere.
Capacity headroom and latency ceiling
The 64GB total gives ample space for heavy multitasking, virtual machines and large creative projects without paging to disk. At CL46 the CAS latency is higher than enthusiast kits, so latency-sensitive workloads may not reach their peak responsiveness. The 2Rx8 organisation helps density but does not lower the timing figure.
DDR5 interface practical limits
The modules run at DDR5 5600 (PC5-44800) with a standard 1.10V operating voltage. This is the baseline JEDEC speed for the platform, so no manual tuning or XMP profile is required for stable operation. Systems that demand higher data rates or tighter timings will not achieve them with this kit.
Highlights
- 64 GB kit doubles capacity for demanding workloads
- DDR5 5600 speed delivers high data throughput
- CL46 latency supports responsive system operation
- 1 V operation reduces power draw and heat
- Validated for GIGABYTE Z690I AORUS Ultra, Plus, LITE boards
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | GIGABYTE |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Questions about this item
Will the 2Rx8 dual-rank 32 GB sticks run alongside any existing single-rank DDR5 modules I keep in the other two slots?
The kit provides two 32 GB 2Rx8 modules at DDR5 5600 CL46; mixing ranks is possible but the board will train all slots to the slowest common speed and latency.
How can I confirm the kit is operating at the rated 5600 MT/s and CL46 after installation?
Open the BIOS or a tool such as CPU-Z and verify the memory frequency reads 5600 MT/s with timings showing 46-46-46.
Does the package include only the two UDIMMs or are screws, a driver or thermal pads also supplied?
The box contains only the 64 GB (2 × 32 GB) DDR5 5600 UDIMM kit; no screws, drivers or thermal pads are included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
