BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 64 GB DDR5 kit with two 32 GB UDIMMs running at 5600 MT/s, CL46 and 1.1 V for the GIGABYTE X870I AORUS PRO ICE motherboard
This 64GB kit contains two 32GB DDR5 5600 CL46 modules built for the GIGABYTE X870I AORUS PRO ICE Mini-ITX motherboard. The 2Rx8 unbuffered UDIMMs run at 1.1V without a heat spreader. Buyers needing ECC or registered DIMMs should look elsewhere.
Operating at the standard DDR5 voltage of 1.10V, the modules draw minimal power and produce little heat during typical desktop workloads. No heat spreader is fitted, so airflow from the CPU cooler or case fans passes directly over the DRAM. Silent operation is maintained under normal use.
The 2Rx8 organisation and CL46 latency deliver stable throughput during extended sessions such as compilation or rendering. Without a spreader, thermal headroom depends on case airflow rather than onboard dissipation. The kit is validated for continuous operation at the rated 5600 MT/s speed.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | GIGABYTE |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Align the notch on each module with the slot key, press down firmly until both side clips click shut, then power on and enter the BIOS to confirm the kit runs at DDR5 5600 CL46 1.10V — many builders forget to verify the speed and latency after seating the sticks.
No scheduled maintenance is required; keep the slots dust-free and, if a module ever fails, replace it with an identical DDR5 5600 CL46 1.1V 2Rx8 UDIMM to preserve dual-channel operation.
The CAS latency of CL46 at 1.1V is the primary timing constraint; the memory controller will throttle bandwidth before temperature becomes an issue because the modules have no heat spreader.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?