We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 64GB 2x32GB DDR5 5600 CL46 2Rx8 ECC RDIMM memory upgrade for Supermicro X14SDW-64C-SP9F

SKU CH-Y6NS-KMA1A

A 64 GB DDR5 ECC registered DIMM kit, two 32 GB modules at 5600 MT/s CL46 1.10 V, validated for the Supermicro X14SDW-64C-SP9F

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

Show 4 more configurations
  • 64 GB kit lets the board run fully populated at rated speed
  • Registered ECC design corrects single-bit errors to prevent silent data corruption
  • DDR5 5600 CL46 timing matches the controller spec for stable operation
  • 2Rx8 organisation on 288-pin RDIMM fits the motherboard slot exactly
  • 1 V operation keeps power draw low for dense server deployments

64 GB DDR5 ECC RDIMM kit for Supermicro X14SDW

This 64 GB kit contains two 32 GB DDR5 5600 modules built to the exact rank, voltage and timing the Supermicro X14SDW-64C-SP9F expects. Registered ECC architecture lets the board run every slot fully populated at rated speed while correcting single-bit errors before they reach production workloads.

288-pin registered form factor with 1.1 V operation

The 288-pin RDIMM design matches the motherboard's required registered format, not UDIMM or SODIMM. Operating at 1.1 V with CL46 latency, the modules follow the board's population rules so the memory controller recognises full capacity immediately without manual tuning.

Replaces mismatched or lower-capacity DDR5 RDIMMs

Install this kit when the current memory is a mix of ranks, speeds or voltages that prevent full-speed operation across all channels. The jump is worth it when the server needs the full 64 GB at DDR5 5600 with registered ECC stability and the board's manual confirms this population order.

Highlights

  • 64 GB kit lets the board run fully populated at rated speed
  • Registered ECC design corrects single-bit errors to prevent silent data corruption
  • DDR5 5600 CL46 timing matches the controller spec for stable operation
  • 2Rx8 organisation on 288-pin RDIMM fits the motherboard slot exactly
  • 1 V operation keeps power draw low for dense server deployments

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the DDR5 5600 PC5-44800 interface run at its rated 5600 MT/s on the Supermicro X14SDW-64C-SP9F?

Yes, the kit is spec-matched to the board so the memory controller recognises the exact rank, voltage and timing and operates at the rated 5600 MT/s.

What physical slot and form factor must the motherboard provide for these modules?

The board needs 288-pin DDR5 RDIMM slots; the kit will not fit UDIMM or SODIMM sockets.

What population order does the Supermicro X14SDW-64C-SP9F manual require for a two-module kit?

Consult the motherboard manual for the approved DIMM population sequence before installing the two 32 GB modules.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.