SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00496945BTC
In stock
NEMIX RAM
NEMIX RAM 64GB (4×16GB) DDR5-6400 CL52 1.1V 1Rx8 ECC Registered RDIMM 288-pin Supermicro H13SSW
A 64GB DDR5-6400 registered ECC kit of four 16GB modules at CL52 and 1.1V, validated for the Supermicro H13SSW motherboard
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-match DDR5-6400 kit installs at rated speed
- 64 GB capacity across four 16 GB modules
- Registered ECC design prevents silent data corruption
- 1 V operation lowers server power draw
- Verified fit for Supermicro H13SSW motherboard
Exact-Match DDR5 RDIMM Kit for Supermicro H13SSW
This 64GB kit contains four 16GB DDR5-6400 Registered ECC modules built to the 1Rx8 rank and 1.1V voltage the Supermicro H13SSW memory controller expects. The 288-pin RDIMM form factor matches the board's slot requirements so the full capacity is recognised at the rated CL52 speed.
Sustained Enterprise Stability
Registered buffering offloads the memory controller, allowing all four slots to run fully populated at DDR5-6400 without signal degradation under continuous load. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during long-running production workloads.
Straightforward Slot Installation
Modules insert vertically into the 288-pin DIMM slots; no heat spreaders mean tight clearance is rarely an issue. The most common mistake is ignoring the motherboard's prescribed population order, so consult the H13SSW manual for the correct slot sequence before seating all four sticks.
Highlights
- Exact-match DDR5-6400 kit installs at rated speed
- 64 GB capacity across four 16 GB modules
- Registered ECC design prevents silent data corruption
- 1 V operation lowers server power draw
- Verified fit for Supermicro H13SSW motherboard
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
How much power does the 64GB DDR5-6400 kit draw at its rated 1.10V voltage all day?
Each module runs at 1.10V, the standard DDR5 RDIMM voltage, so total draw scales with the four 16GB sticks installed.
What motherboard slot and chipset must I already have for this 288-pin RDIMM kit to work?
You need a Supermicro H13SSW motherboard with 288-pin DDR5 RDIMM slots that accept Registered ECC memory.
Will these CL52 Registered ECC modules run correctly beside older DDR5 RDIMMs I keep in the same server?
They are validated for the H13SSW population rules; mixing ranks or speeds can prevent full-capacity operation, so match the 1Rx8 CL52 spec in every populated slot.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
