We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR4 3200 CL22 ECC RDIMM 2Rx8 1.2V server RAM

SKU CH-9YTX-760K6

A 64 GB kit of four 16 GB DDR4 3200 CL22 ECC registered DIMMs for server workloads

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Capacity 64GB (4 x 16GB)

  • 64 GB total capacity from four 16 GB modules
  • DDR4 3200 speed with CL22 latency for server workloads
  • ECC registered RDIMM detects and corrects memory errors
  • 2 V operation reduces power draw in dense configs
  • Built with major OEM Samsung Micron Hynix DRAM chips

NEMIX RAM 64GB DDR4 Server Kit

This NEMIX RAM kit provides 64GB of DDR4 ECC registered memory in a matched set of four 16GB modules. It is designed for servers and workstations that require error correction and registered signal integrity for stable operation under continuous workloads. The modules run at 3200MHz with CL22 latency at the standard 1.20V voltage.

Thermals and Power at 1.20V

Operating at 1.20V, these modules draw minimal power and generate little heat during normal server operation. No heat spreaders are fitted, so airflow across the bare PCB is sufficient for thermal management within a properly ventilated chassis. The low voltage and registered design help keep system power draw predictable.

What the Kit Configuration Changes

The 4x16GB layout populates four DIMM slots to reach 64GB total capacity while maintaining dual-rank 2Rx8 organisation on each module. This arrangement allows the memory controller to interleave across all channels for maximum throughput. No software or driver installation is required; compatibility depends on the motherboard supporting DDR4 RDIMM ECC memory.

Highlights

  • 64 GB total capacity from four 16 GB modules
  • DDR4 3200 speed with CL22 latency for server workloads
  • ECC registered RDIMM detects and corrects memory errors
  • 2 V operation reduces power draw in dense configs
  • Built with major OEM Samsung Micron Hynix DRAM chips

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-628K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 ECC RDIMM Registered Server Memory Motherboard Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 288-pin DDR4 RDIMM modules and what step is often missed?

Align each 288-pin module with the server DIMM slot, press firmly until both retention clips click, then verify in BIOS that all 64GB are detected at 3200 MT/s with ECC active.

What maintenance or replacement will the 2Rx8 registered ECC kit need over time?

No scheduled maintenance is required; if a module fails the lifetime replacement warranty covers it, otherwise the kit runs until a platform upgrade demands DDR5.

What limit appears first when the 1.20 V CL22 kit runs sustained workloads?

The CL22 latency at 3200 MT/s sets the throughput ceiling before the 1.20 V registered buffer reaches thermal or voltage limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.