We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 4800 ECC RDIMM CL40 1.1V 288-Pin Server RAM

SKU CH-5WPB-A4K6P

A 64GB kit of four 16GB DDR5 4800 ECC registered DIMMs at CL40 and 1.1V for Dell PowerEdge R660xs servers

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Capacity 64GB (4 x 16GB)

Show 2 more configurations

Struck-through versions exist but are not stocked here.

Rank 1Rx8

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 64GB kit (4×16GB) scales memory capacity for virtualisation
  • DDR5 4800 speed at 1.10V reduces power draw per module
  • Tested compatible with Dell PowerEdge R660xs rack server

64GB DDR5 ECC RDIMM kit

This 64GB kit contains four 16GB DDR5 4800 registered DIMMs built for Dell PowerEdge R660xs rack servers. Each module runs at 1.1V with CL40 latency and includes on-die ECC for data integrity. The 288-pin RDIMM form factor fits server motherboards that require registered memory.

Registered design and ECC

Registered buffering reduces electrical load on the memory controller so the platform can populate all slots at rated speed. ECC detects and corrects single-bit errors to protect workloads that cannot tolerate silent data corruption. The kit is validated for the specified Dell server model.

64GB capacity for virtualization and databases

Four ranks of 16GB modules give 64GB total, a practical size for moderate virtualization clusters, in-memory databases or high-thread-count application servers. Workloads that exceed this footprint will need additional DIMM slots or higher-density modules. The 4800 MT/s rate provides baseline DDR5 bandwidth for these tasks.

Highlights

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 64GB kit (4×16GB) scales memory capacity for virtualisation
  • DDR5 4800 speed at 1.10V reduces power draw per module
  • Tested compatible with Dell PowerEdge R660xs rack server

Specifications

BrandNEMIX RAM
SeriesDell Series Server Memory
ModelDell Compatible DDR5 ECC Registered RDIMM
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Motherboard Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 16 GB DDR5 RDIMM modules need replacement after a certain service interval?

The modules have no moving parts and no specified wear-out cycle; they remain in service until a capacity upgrade or a motherboard change requires different memory.

What limits sustained throughput when the kit runs at 4800 MT/s continuously?

The CL40 latency and the single-rank 1Rx8 organisation set the timing ceiling that appears first under prolonged load.

How much heat and power does the 1.1 V kit produce during all-day operation?

At 1.1 V the four registered DIMMs draw modest power and run without heat spreaders, so chassis airflow handles the thermal load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.