NEMIX RAM 16GB DDR5 4800 CL40 1.1V 288-Pin ECC RDIMM Dell R6615
- 16GB
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
Four 16 GB DDR5 RDIMM modules with ECC and registered buffering at 4800 MT/s for Dell PowerEdge R6615 servers
Capacity 64GB (4 x 16GB)
Struck-through versions exist but are not stocked here.
Rank 1Rx8
Struck-through versions exist but are not stocked here.
This 64 GB kit contains four 16 GB DDR5 4800 modules built for registered ECC server platforms. It targets IT teams upgrading Dell PowerEdge R6615 rack servers or compatible enterprise motherboards. Each module runs at 1.10 V and uses a 288-pin RDIMM form factor. The registered design buffers address and command signals for large-capacity stability.
The single-rank 1Rx8 layout and on-die ECC provide error correction without unbuffered timing penalties. CL40 latency at DDR5 4800 (PC5-38400) matches the JEDEC base specification for this speed grade. Modules are validated against the Dell PowerEdge R6615 qualified-vendor list using major OEM DRAM from Samsung, Micron or Hynix. No heat spreader is fitted, relying on server chassis airflow.
At the standard 1.10 V DDR5 voltage the kit draws minimal power per module, helping thermal headroom in 1U rack enclosures. Registered buffering reduces electrical load on the memory controller, lowering system-level power under sustained workloads. Passive cooling is sufficient when installed in Dell-validated configurations with directed airflow. Acoustic impact is negligible compared to chassis fans.
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Series Server Memory |
| Model | Dell Compatible DDR5 ECC Registered RDIMM |
| Part Number | MR38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 ECC Registered Server Motherboard Compatible |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The modules will run at DDR5 4800 speed, delivering PC5 38400 bandwidth with CL40 latency at the rated 1.10 V.
The registered DDR5 RDIMM form factor fits standard server DIMM slots and is limited to the 4800 MT/s data rate and CL40 timing specified for this kit.
Four 288-pin RDIMM modules occupy four adjacent DIMM slots; no heat spreaders are fitted, so standard server airflow clears them.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?