We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, no heat spreader, 288-pin DDR5 RDIMM form factor

NEMIX RAM

NEMIX RAM 64GB DDR5 5600 CL46 1.1V 2Rx4 ECC RDIMM Supermicro X14SRA-F

SKU CH-C2BG-7XZV5

64 GB DDR5 5600 registered ECC RDIMM with 2Rx4 layout, CL46 latency and 1.1 V operation, validated for the Supermicro X14SRA-F motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB

Show 4 more configurations
  • Exact-match 64 GB DDR5-5600 CL46 1.1 V 2Rx4 RDIMM for full-speed recognition
  • Verified fit for Supermicro X14SRA-F with 288-pin registered form factor
  • Enterprise stability from registered ECC design correcting single-bit errors on the fly
  • Check your server manual for supported capacities and DIMM population rules before installing
  • Lifetime replacement warranty with free US-based technical support included

NEMIX RAM 64GB DDR5 5600 ECC RDIMM

This 64GB DDR5 5600 registered ECC module is built for the Supermicro X14SRA-F motherboard. It runs at 1.1V with CL46 timing in a 2Rx4 288-pin RDIMM form factor. The exact rank, voltage and timing match the board's memory controller expectations.

Suits servers needing registered ECC at full

Administrators expanding a Supermicro X14SRA-F with validated DDR5 5600 RDIMMs will meet the board's population rules. Builders requiring unbuffered UDIMMs, SODIMMs or non-ECC memory should select a different module type.

2Rx4 registered ECC at 1.1V CL46

The single specification that decides fitment is the 2Rx4 registered ECC organisation at 1.1V CL46. The memory controller only recognises this rank and timing combination at the rated 5600 speed when all slots are populated.

Highlights

  • Exact-match 64 GB DDR5-5600 CL46 1.1 V 2Rx4 RDIMM for full-speed recognition
  • Verified fit for Supermicro X14SRA-F with 288-pin registered form factor
  • Enterprise stability from registered ECC design correcting single-bit errors on the fly
  • Check your server manual for supported capacities and DIMM population rules before installing
  • Lifetime replacement warranty with free US-based technical support included

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much heat does the 1.1 V 5600 MT/s module add when the server runs 24/7?

At the rated 1.10 V the DDR5 RDIMM draws less power per bit than prior generations, so thermal load stays low even with all slots populated continuously.

What must the system already provide for this 288-pin RDIMM to operate?

A Supermicro X14SRA-F motherboard with DDR5 RDIMM slots and a memory controller that supports 5600 MT/s registered ECC at 1.1 V.

Will this CL46 2Rx4 module work in the same channel as other DDR5 RDIMMs already installed?

Yes, provided the other modules are also DDR5 registered ECC at 5600 MT/s; the board's population rules determine which slots can be mixed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.